2021-01-13 KZ1300 Ride... Better?
Posted: Thu Jan 14, 2021 1:17 am
Kinda feel guilty about pollution of the forum with 'non FJR' content.. but so many of us are simply gear heads.. so if OK by 'management' will continue with posts...
Today...
What are you DAWGS doing? Watching football? Worried about , umm, excuse me, aboooot, snow? If so get a Ural! Me, I have real issues. Ask Ray. He will confirm. I keep trying to get a 41 year old 6 cylinder motorcycle ready for long distance riding, and to make it back at days end not in an ambulance or tow truck.. AAA has no idea what they are in for.. LOL...
So Today..
All in all, a nice ride today.. Beautiful weather, even though we need rain.. badly. Today's temps were predicted in low 70's, the highest I've ridden while trying to determine overheating KZ1300 issues..
Neighbor Gary was nice enough to accompany me in case a ride to cell phone reception was needed for the dreaded AAA tow truck call.. He rides a very trick DR650 Suzuki, so speeds would be lower than normal, but OK... as I wanted to see how overheating responded with newly flushed cooling system and Evans waterless coolant..
Interesting.. As the temps rose from high 50'sF to high 60'sF, the coolant temp DROPPED by 2, maybe 3, needle widths.. from the 'P' of TemP, to the E of TEmp.. Could it be I've been running in lower ambient temps that keep the thermostat bypass slightly? Then when ambient F rises, the t-stat fully closes bypass and allows for full cooling?
Don't know.. but in 2 days 80F + temps are predicted, so will run it again and test.
Oil consumption is an issue. Call it ~150 miles today, and 300cc consumed. Gary, my riding partner today, report blue smoke on deceleration.. and today processed a healthy dose of Yamaha RingFree to see if it would help. Consumption seems to be a bit less than previously on the 'Flog' ride..
On the bright side, even in low 70F ambient temps, running slow in traffic, she never overheated.. got to the top of 'normal operating zone'... but no needle past the far right side of 'hot' zone.. as has previously happened.
On the good side.. running strong, about 36 mpg.
Pulled plugs 1,2, 5,6, the 'easy' ones to remove.. 1,2.... these are the oil consumers.. 5,6 look text book great.. 1,2... low side on kickstand.. coincidence?
Anyway, a short video...
Today...
What are you DAWGS doing? Watching football? Worried about , umm, excuse me, aboooot, snow? If so get a Ural! Me, I have real issues. Ask Ray. He will confirm. I keep trying to get a 41 year old 6 cylinder motorcycle ready for long distance riding, and to make it back at days end not in an ambulance or tow truck.. AAA has no idea what they are in for.. LOL...
So Today..
All in all, a nice ride today.. Beautiful weather, even though we need rain.. badly. Today's temps were predicted in low 70's, the highest I've ridden while trying to determine overheating KZ1300 issues..
Neighbor Gary was nice enough to accompany me in case a ride to cell phone reception was needed for the dreaded AAA tow truck call.. He rides a very trick DR650 Suzuki, so speeds would be lower than normal, but OK... as I wanted to see how overheating responded with newly flushed cooling system and Evans waterless coolant..
Interesting.. As the temps rose from high 50'sF to high 60'sF, the coolant temp DROPPED by 2, maybe 3, needle widths.. from the 'P' of TemP, to the E of TEmp.. Could it be I've been running in lower ambient temps that keep the thermostat bypass slightly? Then when ambient F rises, the t-stat fully closes bypass and allows for full cooling?
Don't know.. but in 2 days 80F + temps are predicted, so will run it again and test.
Oil consumption is an issue. Call it ~150 miles today, and 300cc consumed. Gary, my riding partner today, report blue smoke on deceleration.. and today processed a healthy dose of Yamaha RingFree to see if it would help. Consumption seems to be a bit less than previously on the 'Flog' ride..
On the bright side, even in low 70F ambient temps, running slow in traffic, she never overheated.. got to the top of 'normal operating zone'... but no needle past the far right side of 'hot' zone.. as has previously happened.
On the good side.. running strong, about 36 mpg.
Pulled plugs 1,2, 5,6, the 'easy' ones to remove.. 1,2.... these are the oil consumers.. 5,6 look text book great.. 1,2... low side on kickstand.. coincidence?
Anyway, a short video...