ABS test coupler 90890-03149

Tech section strictly for the FJR. Everything from oil changes & suspension setup's to removing sheep hair from hard to reach places on the bike so that your wife never finds out.
CollingsBob
Veteran
Posts: 407
Joined: Thu Mar 08, 2018 2:19 pm
FJRModel: 2017 FJR1300ES
1953 “C” Vincent Rapide
Location: Winnipeg
x 702
x 215

ABS test coupler 90890-03149

Post by CollingsBob » Tue Apr 10, 2018 8:52 am

The ABS test coupler 90890-03149 is no longer available in North America...however it is still available in the U.K.. I have contacted a Yamaha dealer in Edinburgh who will bring some in for me. The cost is about $15.00CDN each.

I can bring some to Nakusp..pm me if you are interested.
Last edited by CollingsBob on Tue Apr 10, 2018 8:58 am, edited 1 time in total.

User avatar
wheatonFJR
I post more than I ride
Posts: 7064
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013
Location: Travelers Rest, SC
x 5809
x 2917

Re: ABS test coupler 90890-03149

Post by wheatonFJR » Tue Apr 10, 2018 8:57 am

CollingsBob wrote:
Tue Apr 10, 2018 8:52 am
The ABS test coupler 90890-03149 is no longer available in North America...however it is still available in the U.K.. I have contacted a Yamaha dealer in Glasgow who will bring some in for me. The cost is about $15.00CDN each.

I can bring some to Nakusp..pm me if you are interested.
I'd be interested...but griff would have to bring it back to me...as he's going and I'm not.

CollingsBob
Veteran
Posts: 407
Joined: Thu Mar 08, 2018 2:19 pm
FJRModel: 2017 FJR1300ES
1953 “C” Vincent Rapide
Location: Winnipeg
x 702
x 215

Re: ABS test coupler 90890-03149

Post by CollingsBob » Tue Apr 10, 2018 9:02 am

Sent you a pm with the dealers contact info..

User avatar
ionbeam
Veteran
Posts: 514
Joined: Mon Feb 04, 2013 7:14 am
FJRModel: '15ES in Low-Viz Assfault Gray
Location: Sandown, NH
x 51
x 685

Re: ABS test coupler 90890-03149

Post by ionbeam » Tue Apr 10, 2018 9:28 am

Failing that, all you need is a jumper wire to short two pins together, that is all the ABS test coupler is. I've got a procedure written over in the 'Evil Empire Forum'. I'll fetch a link for it shortly.

Link.
Last edited by ionbeam on Tue Apr 10, 2018 9:34 am, edited 1 time in total.

User avatar
0face
Purveyor of Pr0n
Posts: 2495
Joined: Wed Jan 16, 2013 4:30 pm
FJRModel: 2008
Location: Evanston, Illinois
x 234
x 1134

Re: ABS test coupler 90890-03149

Post by 0face » Tue Apr 10, 2018 9:33 am

ionbeam wrote:
Tue Apr 10, 2018 9:28 am
Failing that, all you need is a jumper wire to short two pins together, that is all the ABS test coupler is. I've got a procedure written over in the 'Evil Empire Forum'. I'll fetch a link for it shortly.
You might want to bring the post over here rather than just the link for posterity sake. JSNS.
"Lets all do what we can do to bring thick skinned, donkey raping shit eaters to this joint."
-Bust

User avatar
ionbeam
Veteran
Posts: 514
Joined: Mon Feb 04, 2013 7:14 am
FJRModel: '15ES in Low-Viz Assfault Gray
Location: Sandown, NH
x 51
x 685

Re: ABS test coupler 90890-03149

Post by ionbeam » Tue Apr 10, 2018 9:37 am

^^^^^^ Ya, Tech section stuffer for the new On Topic Only repository of Good Stuff. Mebby this weekend.
Uncle Hud and wheatonFJR loved this

User avatar
raYzerman
Veteran
Posts: 2376
Joined: Mon Mar 18, 2013 10:49 am
FJRModel: 2014 A Root Beer, 2008 WR450F, 2006 FJR Project
Location: Millgrove, Ontario, CA
x 413
x 1109

Re: ABS test coupler 90890-03149

Post by raYzerman » Tue Apr 10, 2018 11:29 am

I ordered a few connectors from Eastern Beaver, comes with terminals, and made mine so it has spade terminals to connect a switch. I mounted it under the battery cover, so all I have to do is reach in and flip the switch if I'm in there. Gen3 has room to put stuff under there.
I made another to take to tech days..... I can make a batch if I get some more connectors, have not dug into costs.....
But those on a budget, jumpering the terminals in the original connector is pretty easy like Allan says. Sky blue to black.
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.

User avatar
wheatonFJR
I post more than I ride
Posts: 7064
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013
Location: Travelers Rest, SC
x 5809
x 2917

Re: ABS test coupler 90890-03149

Post by wheatonFJR » Tue Apr 10, 2018 12:10 pm

raYzerman wrote:
Tue Apr 10, 2018 11:29 am
I ordered a few connectors from Eastern Beaver, comes with terminals, and made mine so it has spade terminals to connect a switch. I mounted it under the battery cover, so all I have to do is reach in and flip the switch if I'm in there. Gen3 has room to put stuff under there.
I made another to take to tech days..... I can make a batch if I get some more connectors, have not dug into costs.....
But those on a budget, jumpering the terminals in the original connector is pretty easy like Allan says. Sky blue to black.
I would definitely check these to make sure the wires aren't upside down.
griff and 0face loved this

CollingsBob
Veteran
Posts: 407
Joined: Thu Mar 08, 2018 2:19 pm
FJRModel: 2017 FJR1300ES
1953 “C” Vincent Rapide
Location: Winnipeg
x 702
x 215

Re: ABS test coupler 90890-03149

Post by CollingsBob » Tue Apr 10, 2018 12:21 pm

I’ve ordered 2..
wheatonFJR loved this

User avatar
raYzerman
Veteran
Posts: 2376
Joined: Mon Mar 18, 2013 10:49 am
FJRModel: 2014 A Root Beer, 2008 WR450F, 2006 FJR Project
Location: Millgrove, Ontario, CA
x 413
x 1109

Re: ABS test coupler 90890-03149

Post by raYzerman » Tue Apr 10, 2018 12:55 pm

wheatonFJR wrote:
Tue Apr 10, 2018 12:10 pm
raYzerman wrote:
Tue Apr 10, 2018 11:29 am
I ordered a few connectors from Eastern Beaver, comes with terminals, and made mine so it has spade terminals to connect a switch. I mounted it under the battery cover, so all I have to do is reach in and flip the switch if I'm in there. Gen3 has room to put stuff under there.
I made another to take to tech days..... I can make a batch if I get some more connectors, have not dug into costs.....
But those on a budget, jumpering the terminals in the original connector is pretty easy like Allan says. Sky blue to black.
I would definitely check these to make sure the wires aren't upside down.
Then it would be black to sky blue.......
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.

User avatar
ionbeam
Veteran
Posts: 514
Joined: Mon Feb 04, 2013 7:14 am
FJRModel: '15ES in Low-Viz Assfault Gray
Location: Sandown, NH
x 51
x 685

Re: ABS test coupler 90890-03149

Post by ionbeam » Tue Apr 10, 2018 1:24 pm

CollingsBob wrote:
Tue Apr 10, 2018 12:21 pm
I’ve ordered 2..
With that, each coupler will have the ABS test pins jumped together to enable the ABS tests. It also will have two wires onto which you clip a multi-meter and read pulses to count out error codes. This is one time where an old school multi-meter is superior to a digital multi-meter.

User avatar
bigjohnsd
Veteran
Posts: 822
Joined: Sun May 18, 2014 4:28 pm
FJRModel: 2014 BMW R1200GSA
x 457
x 619

Re: ABS test coupler 90890-03149

Post by bigjohnsd » Fri May 18, 2018 12:40 am

Ray, if you have an extra please bring to Black Hills Roundup II. I'll be glad to purchase from you.
"The only Dumb Question is the unasked Question " - Anonymous
Eat every Sandwich like it is your last!

User avatar
wheatonFJR
I post more than I ride
Posts: 7064
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013
Location: Travelers Rest, SC
x 5809
x 2917

Re: ABS test coupler 90890-03149

Post by wheatonFJR » Fri May 18, 2018 5:53 am

CollingsBob wrote:
Tue Apr 10, 2018 12:21 pm
I’ve ordered 2..
Thanks! I will need to find a Yank going to CFR to mail it to me. I think Cav47 is headed up that way. I'll have him pick it up and mail it.

Time to pm cowface.
CollingsBob loved this

User avatar
raYzerman
Veteran
Posts: 2376
Joined: Mon Mar 18, 2013 10:49 am
FJRModel: 2014 A Root Beer, 2008 WR450F, 2006 FJR Project
Location: Millgrove, Ontario, CA
x 413
x 1109

Re: ABS test coupler 90890-03149

Post by raYzerman » Fri May 18, 2018 6:14 am

bigjohnsd wrote:
Fri May 18, 2018 12:40 am
Ray, if you have an extra please bring to Black Hills Roundup II. I'll be glad to purchase from you.
I have a spare..... meanwhile, on Gen3, the two wires to jump are the black and Sky Blue with silver/gray tracer.

Image
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.

User avatar
silverback
Veteran
Posts: 1562
Joined: Wed Feb 06, 2013 5:36 pm
FJRModel: 2005
Location: Wichita, KS
x 1
x 544

Re: RE: Re: ABS test coupler 90890-03149

Post by silverback » Fri May 18, 2018 9:22 am

ionbeam wrote:
CollingsBob wrote:
Tue Apr 10, 2018 12:21 pm
I’ve ordered 2..
With that, each coupler will have the ABS test pins jumped together to enable the ABS tests. It also will have two wires onto which you clip a multi-meter and read pulses to count out error codes. This is one time where an old school multi-meter is superior to a digital multi-meter.
So...just a thought...

Most Japanese made automotive products use the same types of connectors. I contend that a trip to the local pick-a-part with a picture of the dummy plug on your cell phone could net you a fairly inexpensive and fully compatible pigtail.

With said pigtail, one could wire in a momentary on push button switch and an LED with appropriate resistor in the correct circuits. Then, one could mount them in an inconspicuous location amd perform ABS diag with the push of a button and read the blinks for codes.

Worth a try?
There's just too much what the fuck in this thread to know where to begin...
--BikerGeek

User avatar
ionbeam
Veteran
Posts: 514
Joined: Mon Feb 04, 2013 7:14 am
FJRModel: '15ES in Low-Viz Assfault Gray
Location: Sandown, NH
x 51
x 685

Re: RE: Re: ABS test coupler 90890-03149

Post by ionbeam » Fri May 18, 2018 9:29 am

silverback wrote:
Fri May 18, 2018 9:22 am
...could net you a fairly inexpensive and fully compatible pigtail.

With said pigtail, one could wire in a momentary on push button switch ...one could mount them in an inconspicuous location amd perform ABS diag with the push of a button and read the blinks for codes...
From another dimension in space & time this has been detailed here. A standard LED with wire legs and a 100Ω resistor in series for the code pins is a real good idea.
wheatonFJR loved this

User avatar
wheatonFJR
I post more than I ride
Posts: 7064
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013
Location: Travelers Rest, SC
x 5809
x 2917

Re: RE: Re: ABS test coupler 90890-03149

Post by wheatonFJR » Fri May 18, 2018 9:38 am

ionbeam wrote:
Fri May 18, 2018 9:29 am
silverback wrote:
Fri May 18, 2018 9:22 am
...could net you a fairly inexpensive and fully compatible pigtail.

With said pigtail, one could wire in a momentary on push button switch ...one could mount them in an inconspicuous location amd perform ABS diag with the push of a button and read the blinks for codes...
From another dimension in space & time this has been detailed here. A standard LED with wire legs and a 100Ω resistor in series for the code pins is a real good idea.
...and that is why Sir Alan of Ionbeam is the smartest man on FJRiders. JSNS!

User avatar
0face
Purveyor of Pr0n
Posts: 2495
Joined: Wed Jan 16, 2013 4:30 pm
FJRModel: 2008
Location: Evanston, Illinois
x 234
x 1134

Re: ABS test coupler 90890-03149

Post by 0face » Fri May 18, 2018 10:14 am

Any chance you can/will cut and paste that info here for those of us who are not allowed into Mordor?
wheatonFJR loved this
"Lets all do what we can do to bring thick skinned, donkey raping shit eaters to this joint."
-Bust

User avatar
ionbeam
Veteran
Posts: 514
Joined: Mon Feb 04, 2013 7:14 am
FJRModel: '15ES in Low-Viz Assfault Gray
Location: Sandown, NH
x 51
x 685

Re: ABS test coupler 90890-03149

Post by ionbeam » Fri May 18, 2018 10:37 am

0face wrote:
Fri May 18, 2018 10:14 am
Any chance you can/will cut and paste that info here for those of us who are not allowed into Mordor?
I'll get to it, I need to do some updates. Spring is busy with home construction, winter recovery and...... it's racing season! Busy burning all the rubber off this car at the track right now. (The hood is open to help cool the engine for the next round, in theory a cooler intake will make more power.)

Image

User avatar
wheatonFJR
I post more than I ride
Posts: 7064
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013
Location: Travelers Rest, SC
x 5809
x 2917

Re: ABS test coupler 90890-03149

Post by wheatonFJR » Fri May 18, 2018 12:13 pm

ionbeam wrote:
Fri May 18, 2018 10:37 am
0face wrote:
Fri May 18, 2018 10:14 am
Any chance you can/will cut and paste that info here for those of us who are not allowed into Mordor?
I'll get to it, I need to do some updates. Spring is busy with home construction, winter recovery and...... it's racing season! Busy burning all the rubber off this car at the track right now. (The hood is open to help cool the engine for the next round, in theory a cooler intake will make more power.)

Image
^^^^^^^^^^^^^^^^^^
Stock photo...we need video proof with Alan taking off his helmet after the 155mph 1/2 mile run.
Uncle Hud loved this

Post Reply