Page 1 of 1

90º valve stems

Posted: Wed Jun 17, 2015 1:22 pm
by silverback
What are the recommended 90º valve stems for the FJR. Bikemaster looks good, but I would like a rundown of what works well in our wheels.

Re: 90º vslve stems

Posted: Wed Jun 17, 2015 3:25 pm
by OldButNotDead
You might want to look over on FJROwners. There was a thread just like this one not too long ago. One brand had a real low profile and looked good.

Re: 90º vslve stems

Posted: Wed Jun 17, 2015 3:39 pm
by 0face
Contact Cougar8000/Alex he has a shitload of them to sell.

Re: 90º vslve stems

Posted: Wed Jun 17, 2015 3:40 pm
by Old Guy
I installed a set of these with my last tire change. Quality looks good, but I only have about 3200 miles on them.

http://www.amazon.com/gp/product/B001P5 ... ge_o01_s00

Re: 90º valve stems

Posted: Wed Jun 17, 2015 8:35 pm
by silverback
Thanks for the suggestions. I will get some from Alex. He has always done me straight. Where the heck has he been lately?

Re: 90º vslve stems

Posted: Thu Jun 18, 2015 8:19 am
by bungie4
0face wrote:Contact Cougar8000/Alex he has a shitload of them to sell.
Thanks for the reminder, bought a set for the 04 off of Alex, but sold them with the bike. Need to replace them on the '13.

Alex will get the nod.

Might as well go for a full load of speed bleeders while I'm at it.

Re: 90º vslve stems

Posted: Thu Jun 18, 2015 9:50 am
by Intech
bungie4 wrote:
0face wrote:Contact Cougar8000/Alex he has a shitload of them to sell.
Thanks for the reminder, bought a set for the 04 off of Alex, but sold them with the bike. Need to replace them on the '13.

Alex will get the nod.

Might as well go for a full load of speed bleeders while I'm at it.
I have to do the same for the '15.

Re: 90º valve stems

Posted: Thu Jun 18, 2015 5:45 pm
by Cougar8000
ohoh I heard my name calling.

Sorry for hiding under the dust. Last year and a change was very dusty, crazy, challenging and not fun at all. Only put maybe 3k on the bike in the last 18 month. Business crapped out, another spun up, family went through some roller coaster times. Now that dust is settling down, I am going to try to brush the dust off. All that probably for another thread that you might not care.

As far as valve goes. I gotZ some and they are here https://mishacycles.com/store/Aluminum- ... valve.html

Bleeders should be somewhere there as well. Need to brush up the web site and remove some stuff, not above mentioned, as I am trying to reorg and realign things and kick this bitch in da nutZ to make it move.

Do we still have fun Friday to look for?

Re: 90º valve stems

Posted: Thu Jun 18, 2015 8:08 pm
by usaffjr
Concur with the Alex recommendation.