90º valve stems

silverback · Post by **silverback** » Wed Jun 17, 2015 1:22 pm

What are the recommended 90º valve stems for the FJR. Bikemaster looks good, but I would like a rundown of what works well in our wheels.

OldButNotDead · Post by **OldButNotDead** » Wed Jun 17, 2015 3:25 pm

You might want to look over on FJROwners. There was a thread just like this one not too long ago. One brand had a real low profile and looked good.

0face · Post by **0face** » Wed Jun 17, 2015 3:39 pm

Contact Cougar8000/Alex he has a shitload of them to sell.

Old Guy · Post by **Old Guy** » Wed Jun 17, 2015 3:40 pm

I installed a set of these with my last tire change. Quality looks good, but I only have about 3200 miles on them.

http://www.amazon.com/gp/product/B001P5 ... ge_o01_s00

silverback · Post by **silverback** » Wed Jun 17, 2015 8:35 pm

Thanks for the suggestions. I will get some from Alex. He has always done me straight. Where the heck has he been lately?

bungie4 · Post by **bungie4** » Thu Jun 18, 2015 8:19 am

0face wrote:Contact Cougar8000/Alex he has a shitload of them to sell.

Thanks for the reminder, bought a set for the 04 off of Alex, but sold them with the bike. Need to replace them on the '13.

Alex will get the nod.

Might as well go for a full load of speed bleeders while I'm at it.

Intech · Post by **Intech** » Thu Jun 18, 2015 9:50 am

bungie4 wrote:
0face wrote:Contact Cougar8000/Alex he has a shitload of them to sell.
Thanks for the reminder, bought a set for the 04 off of Alex, but sold them with the bike. Need to replace them on the '13.

Alex will get the nod.

Might as well go for a full load of speed bleeders while I'm at it.

I have to do the same for the '15.

Cougar8000 · Post by **Cougar8000** » Thu Jun 18, 2015 5:45 pm

ohoh I heard my name calling.

Sorry for hiding under the dust. Last year and a change was very dusty, crazy, challenging and not fun at all. Only put maybe 3k on the bike in the last 18 month. Business crapped out, another spun up, family went through some roller coaster times. Now that dust is settling down, I am going to try to brush the dust off. All that probably for another thread that you might not care.

As far as valve goes. I gotZ some and they are here https://mishacycles.com/store/Aluminum- ... valve.html

Bleeders should be somewhere there as well. Need to brush up the web site and remove some stuff, not above mentioned, as I am trying to reorg and realign things and kick this bitch in da nutZ to make it move.

Do we still have fun Friday to look for?

usaffjr · Post by **usaffjr** » Thu Jun 18, 2015 8:08 pm

Concur with the Alex recommendation.

FJRiders.com

90º valve stems

90º valve stems

Re: 90º vslve stems

Re: 90º vslve stems

Re: 90º vslve stems

Re: 90º valve stems

Re: 90º vslve stems

Re: 90º vslve stems

Re: 90º valve stems

Re: 90º valve stems