Lowering the bike

Tech section strictly for the FJR. Everything from oil changes & suspension setup's to removing sheep hair from hard to reach places on the bike so that your wife never finds out.
Post Reply
okeefjr
Squid
Posts: 15
Joined: Wed May 07, 2014 4:04 pm
FJRModel: 2014
Location: Townsend Tn

Lowering the bike

Post by okeefjr »

With my head down in shame--- I dropped my new bike scratching the left mirror, left side cover and saddlebag. With my 29" inseam I'm having a really hard time touching. Is there anything I can do to lower 1 or 2 inches. I don't remember having this problem with my 05. Need help badly.
User avatar
ts3doug
Veteran
Posts: 1002
Joined: Sun May 19, 2013 3:29 pm
FJRModel: 08 a/07 speed tiple
x 71

Re: Lowering the bike

Post by ts3doug »

There were some homemade lowering links on my '08 when I bought it. you're more than welcome to have them if theyll work for you
User avatar
ts3doug
Veteran
Posts: 1002
Joined: Sun May 19, 2013 3:29 pm
FJRModel: 08 a/07 speed tiple
x 71

Re: Lowering the bike

Post by ts3doug »

Or do you have a Gen 3, no t sure of the differences there
User avatar
twowheelr
Casual Rider
Posts: 59
Joined: Sun Feb 03, 2013 6:40 pm
FJRModel: 2009 Yamaha FZ-1
Location: winston salem,NC

Re: Lowering the bike

Post by twowheelr »

Look up Soupy's lowering links, they are turnbuckle style so you have infinite adjust ability.
I too have a 29" inseam , and I was able to set the height so I can get 1 foot flat , or touch the balls of my feet.
User avatar
silverback
Veteran
Posts: 1974
Joined: Wed Feb 06, 2013 5:36 pm
FJRModel: 2005
Location: Wichita, KS
x 1
x 1250

Re: Lowering the bike

Post by silverback »

Your seat is at the lower setting I assume? I have a 30" inseam and ran mine on the high position on the 07. Just a thought...?

Sent from my XT1080 using Tapatalk
There's just too much what the f@$k in this thread to know where to begin...
--BikerGeek
okeefjr
Squid
Posts: 15
Joined: Wed May 07, 2014 4:04 pm
FJRModel: 2014
Location: Townsend Tn

Re: Lowering the bike

Post by okeefjr »

Yes the seat is in low position, I'll look up Soupy's link
User avatar
Red
Veteran
Posts: 940
Joined: Mon Mar 31, 2014 11:09 am
FJRModel: 2008 FJR1300A
Location: near the Great Salt Lake, Utah, USA, Sol III, Orion Spur of the Milky Way galaxy.
x 213
x 1152

Re: Lowering the bike

Post by Red »

okeefjr wrote:Yes the seat is in low position, I'll look up Soupy's link
Okeefjr,

On my 2008, there is a plastic seat bracket which the seat pan sets down on. You can pivot this bracket upward, and spring the pivot pins out of their holes. Then the bracket can be pulled out and set aside. The seat pan will sit solidly down on the frame now, maybe half an inch lower than the Low position. Every little bit helps. :D

What year FJR do you have?

Cheers,
Red
Cheers,
Red

P.S. Life is too short, and health is too valuable, to ride on cheap parade-duty tires.
Yeah, I ride motorcycles. I know why dogs put their heads out of the car windows.
Yeah, I fly hang gliders (3000 hrs.+). I know why the birds sing.
User avatar
Name Etc.
Veteran
Posts: 811
Joined: Sat Jan 19, 2013 9:42 am
FJRModel: 2014 triumph tiger 800sexc
x 1
x 1
Contact:

Re: Lowering the bike

Post by Name Etc. »

New bike drop syndrome. I figure I will just throw my next new one down at the dealer when I buy it. So I can order the parts right away. Get it over with ya know? ;)
ThisMotorCycleLife.net
okeefjr
Squid
Posts: 15
Joined: Wed May 07, 2014 4:04 pm
FJRModel: 2014
Location: Townsend Tn

Re: Lowering the bike

Post by okeefjr »

Red wrote:
okeefjr wrote:Yes the seat is in low position, I'll look up Soupy's link
Okeefjr,

On my 2008, there is a plastic seat bracket which the seat pan sets down on. You can pivot this bracket upward, and spring the pivot pins out of their holes. Then the bracket can be pulled out and set aside. The seat pan will sit solidly down on the frame now, maybe half an inch lower than the Low position. Every little bit helps. :D

What year FJR do you have?

Cheers,
Red
Thanks Red, I will look at that
User avatar
Bounce
Veteran
Posts: 3913
Joined: Sat Jan 19, 2013 10:19 am
FJRModel: 2003
x 7254
x 3453

Re: Lowering the bike

Post by Bounce »

Why keep changing the world around you every time you get something new or meet a new challenge? Address the shortcoming once and be done with it forever!
User avatar
silverback
Veteran
Posts: 1974
Joined: Wed Feb 06, 2013 5:36 pm
FJRModel: 2005
Location: Wichita, KS
x 1
x 1250

Re: Lowering the bike

Post by silverback »

Bounce wrote:Why keep changing the world around you every time you get something new or meet a new challenge? Address the shortcoming once and be done with it forever!
Probably cheaper and definitely more stylish:
Image

Sent from my XT1080 using Tapatalk
There's just too much what the f@$k in this thread to know where to begin...
--BikerGeek
User avatar
HotRodZilla
Veteran
Posts: 4452
Joined: Sat Jan 19, 2013 1:09 am
FJRModel: 07 FJR-A
Location: Albuquerque, NM
x 13000
x 6299

Re: Lowering the bike

Post by HotRodZilla »

silverback wrote:
Bounce wrote:Why keep changing the world around you every time you get something new or meet a new challenge? Address the shortcoming once and be done with it forever!
Probably cheaper and definitely more stylish:
Image

Sent from my XT1080 using Tapatalk
Bust has those shoes. He thinks they make his ass muscular. Beemerdons offered to marry Bust last time Bust had them on.
Post Reply