FJRiders.com

I am making up sets of highway peg mounting plates (similar to the ones Wild Bill used to make) and am now offering to make more for sale to fellow riders. These will fit any model year and come with all necessary hardware as shown in the following pictures. I would provide these powdercoated in medium engine case gray (first image) or silver (for Gen3's - 2nd image) - your choice. Other colors are available at n/c. These do not interfere with removal of the oil filter. Delivered cost stateside is $60. For an additional $30, I can provide you a set of pegs like as shown in the second image powdercoated your color choice or left factory chromed. If you have a different peg selection in mind, have the vendor send them to me and I will powdercoat them at no extra charge. PM me if interested in the kit or if you want more info.

Garauld,

I saw you offered your pegs on ebay. Are you going to offer them there again?

Thanks,

Kern

Send me a PM if you want to buy the kit. I only put them up on EBay if I have extras.

Nice. I'll pass it on to a friend that just bought a 2010.

Looks good!! Wish I had known about these before I bought the MCL ones!!
*
Does anyone have info on different highway footpegs or a way get the pegs further out with the MCL highway pegs? Too much fairing interference with the stock pegs that came with them. Thanks!!
*
Randy Brazie

You willing to make these work with the Canyon Cages? I believe someone on here made a template to modify the MCL version.

I believe someone has used these clamps to mount pegs to the CC bars. You need to verify sizes:

Fairlaner has that setup I do believe.

Due to confusion on the other forum, I am mostly retired but am still offering HW peg kits for the foreseeable future. PM me if you want one.

I PM'd you about the pegs, but I guess I have to post a couple more times to receive the reply.

Good stuff!

PM sent