The 2025 Calendar Voting is now live! Click here to vote!
Yamaha Tall Shield Review
- Blueridgerider
- Member
- Posts: 214
- Joined: Tue Jul 02, 2019 1:22 pm
- FJRModel: 2016 FJR1300A
- x 728
- x 510
Yamaha Tall Shield Review
I bought my 2016 about 3 months ago and found with the stock shield the wind noise/buffeting rather excessive even with earplugs so I bought the tall one after reading reviews and watching a YouTube video comparing the stock vs the tall. I had looked at all the other choices out there and finally decided to give the Yamaha a try. Today I was able to put it to the test in all kinds of conditions and speeds including rain.
The video review I watched concluded it provided great protection from buffeting but there was little mid section air with the shield up. The buffeting was most important to me as I already have tinnitus and want to preserve the hearing I have left so I figured I would take a chance, hoping for the best.
Well, I was really surprised at how good it was for me! I am 5:9 and found that at the top position it was very quiet in the pocket of air behind the shield. I was also getting quite a bit of airflow in my midsection and arms. Very surprised given the video review. I was wearing a mesh jacket and being in SC you need all the air you can get especially in the summer heat to keep from being miserable and I was comfortable. With the shield all the way down it actually seems to give you less air in the mid section and at my height the wind hit me right in the face, the same as the video review. I found the lowest position to be the least appealing even at slower speeds. I also found I could lower it quite a bit from the all the way position without any buffeting so I was able to look over it easily and still have the air pocket. Real pleased there.
It started to rain hard and I put the shield all the way up. I could see through it and did a great job of blocking the rain. I then lowered it a little at a time as I like to look over the shield especially when its raining and found it provided not only good buffeting protection as stated before but it also kept the rain out of my face. Just about perfect.
For my height at 5:9 the shield exceeded my expectations especially for wind noise and buffeting and I would recommend it to anyone looking for the improvements I was. I am not sure how it would be for those a few inches taller than myself however. Reviews always help me and I hope this does for anyone interested in purchasing a new shield who is trying to figure out which one is best for them.
The video review I watched concluded it provided great protection from buffeting but there was little mid section air with the shield up. The buffeting was most important to me as I already have tinnitus and want to preserve the hearing I have left so I figured I would take a chance, hoping for the best.
Well, I was really surprised at how good it was for me! I am 5:9 and found that at the top position it was very quiet in the pocket of air behind the shield. I was also getting quite a bit of airflow in my midsection and arms. Very surprised given the video review. I was wearing a mesh jacket and being in SC you need all the air you can get especially in the summer heat to keep from being miserable and I was comfortable. With the shield all the way down it actually seems to give you less air in the mid section and at my height the wind hit me right in the face, the same as the video review. I found the lowest position to be the least appealing even at slower speeds. I also found I could lower it quite a bit from the all the way position without any buffeting so I was able to look over it easily and still have the air pocket. Real pleased there.
It started to rain hard and I put the shield all the way up. I could see through it and did a great job of blocking the rain. I then lowered it a little at a time as I like to look over the shield especially when its raining and found it provided not only good buffeting protection as stated before but it also kept the rain out of my face. Just about perfect.
For my height at 5:9 the shield exceeded my expectations especially for wind noise and buffeting and I would recommend it to anyone looking for the improvements I was. I am not sure how it would be for those a few inches taller than myself however. Reviews always help me and I hope this does for anyone interested in purchasing a new shield who is trying to figure out which one is best for them.
jwilly, bill lumberg, NBB and 2 others loved this
2016 FJR1300A Traxxionized
2017 Kawasaki Z900
2017 Kawasaki Z900
-
- Contributor
- I post more than I ride
- Posts: 20459
- Joined: Wed Jan 16, 2013 6:10 pm
- FJRModel: 2013-Jwilly Special LD Delivery
- Location: Travelers Rest
- x 43813
- x 18966
Re: Yamaha Tall Shield Review
Glad you found something that you like. Good write up.
I am about the same height but have a taller torso than some. I have always done well with the stock shield in low position. If it rains or is cold at elevation I raise it up as required.
To each his own...glad we have choices.
I am about the same height but have a taller torso than some. I have always done well with the stock shield in low position. If it rains or is cold at elevation I raise it up as required.
To each his own...glad we have choices.
Blueridgerider loved this
boatanchor, 3rd class.
- Viper_Dad
- Member
- Posts: 262
- Joined: Fri Jan 19, 2018 4:35 pm
- FJRModel: 2013
- Location: Virginia, USA
- x 465
- x 466
Re: Yamaha Tall Shield Review
Thanks for the write-up, I agree with you. It's a great shield, especially in the winter months. I really enjoy the stock shield in the summer months, I leave it down to get that blast of hot, humid, Virginia air on my chest. It's just not riding without sweat pouring out of ever orifice. I was lucky, I scored the taller shield on eBay for $50 from some thrift shop... WINNING!
Blueridgerider and bill lumberg loved this
2013 - "Jolene"
Peter
Peter
- bill lumberg
- Contributor
- Veteran
- Posts: 2638
- Joined: Tue Jun 30, 2015 1:03 pm
- FJRModel: 2018ES/2022ES
- x 4068
- x 4538
- Contact:
Re: Yamaha Tall Shield Review
I run the touring screen in the summer. With helis,I get battered with the stock screen. (Okay, I get battered with the stock screen even with the bars in the factory position). The Yamaha touring could easily be the best year round shield for me, if I could only have one. The same company that makes the touring screen makes the vstream 20308, which is pretty awesome as well. Similar coverage to the touring. Maybe a little more shoulder coverage.
Blueridgerider loved this
#boatanchorsmatter
2022ES
2022ES
-
- Contributor
- I post more than I ride
- Posts: 20459
- Joined: Wed Jan 16, 2013 6:10 pm
- FJRModel: 2013-Jwilly Special LD Delivery
- Location: Travelers Rest
- x 43813
- x 18966
Re: Yamaha Tall Shield Review
You get battered because you allow people to hit you with batons, but I won't quibble.bill lumberg wrote: ↑Thu Aug 22, 2019 5:17 pm I run the touring screen in the summer. With helis,I get battered with the stock screen. (Okay, I get battered with the stock screen even with the bars in the factory position). The Yamaha touring could easily be the best year round shield for me, if I could only have one. The same company that makes the touring screen makes the vstream 20308, which is pretty awesome as well. Similar coverage to the touring. Maybe a little more shoulder coverage.
boatanchor, 3rd class.
- bill lumberg
- Contributor
- Veteran
- Posts: 2638
- Joined: Tue Jun 30, 2015 1:03 pm
- FJRModel: 2018ES/2022ES
- x 4068
- x 4538
- Contact:
-
- Contributor
- I post more than I ride
- Posts: 20459
- Joined: Wed Jan 16, 2013 6:10 pm
- FJRModel: 2013-Jwilly Special LD Delivery
- Location: Travelers Rest
- x 43813
- x 18966
Re: Yamaha Tall Shield Review
How'd you know? I haven't told anybody.
bill lumberg loved this
boatanchor, 3rd class.
-
- Contributor
- Veteran
- Posts: 2253
- Joined: Thu Mar 08, 2018 2:19 pm
- FJRModel: 2024 BMW R1300 GS
- Location: Winnipeg
- x 5756
- x 2487
Re: Yamaha Tall Shield Review
I have the touring screen with an MRA touring X-Creen on top..I’m 6’1” tall and I find the combination pretty good..
Blueridgerider loved this
- raYzerman
- Contributor
- I post more than I ride
- Posts: 9680
- Joined: Mon Mar 18, 2013 10:49 am
- FJRModel: 2010 Honda CBF1000FA
- Location: Millgrove, Ontario, CA
- x 3133
- x 11597
Re: Yamaha Tall Shield Review
What I did for the Honda is order this deflector (the wider one), and it clamps on securely and is fully adjustable. The acrylic does not appear to have any coatings, perhaps why it is cheap, but the adjuster stuff is pretty good stuff. I thought I'd try this before going with more expensive stuff like MRA. It does do wonders for the airflow, I never used one of these before, never liked the appearance, but I'm becoming a convert.
https://www.aliexpress.com/item/3288975 ... 4c4dqQbPkz
https://www.aliexpress.com/item/3288975 ... 4c4dqQbPkz
Blueridgerider loved this
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
Duct tape can't fix stupid, but it can sure muffle the sound.
-
- Squid
- Posts: 38
- Joined: Mon Jan 20, 2014 2:19 pm
- FJRModel: 2008
- x 37
- x 12
Re: Yamaha Tall Shield Review
That's pretty much what I'm using on top of my vented touring screen. It seems to lack to pure clarity of the MRA, but it is cheaper and gets the job done. And gives me a lot of on the fly adjustability if I need it.raYzerman wrote: ↑Thu Aug 22, 2019 7:51 pm What I did for the Honda is order this deflector (the wider one), and it clamps on securely and is fully adjustable. The acrylic does not appear to have any coatings, perhaps why it is cheap, but the adjuster stuff is pretty good stuff. I thought I'd try this before going with more expensive stuff like MRA. It does do wonders for the airflow, I never used one of these before, never liked the appearance, but I'm becoming a convert.
https://www.aliexpress.com/item/3288975 ... 4c4dqQbPkz
Blueridgerider loved this