The 2025 Calendar Voting is now live! Click here to vote!

Update-fixed...I hope I don't, but I might have a malfunctioning ABS block

Tech section strictly for the FJR. Everything from oil changes & suspension setup's to removing sheep hair from hard to reach places on the bike so that your wife never finds out.
wheatonFJR
Contributor
I post more than I ride
Posts: 20430
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013-Jwilly Special LD Delivery
Location: Travelers Rest
x 43748
x 18939

Update-fixed...I hope I don't, but I might have a malfunctioning ABS block

Post by wheatonFJR »

I was over at Griff's getting speedbleeders installed and getting the old out and the new in. I have real brake lever action now. Old stuff was pretty orange...especially the linked line.

So we go to exercise the ABS block and nothing happens. Damn. Do it repeatedly, even put a charger on the bike battery, just in case. Still nothing. Damn. Go watch some online idiots video, just in case, the last 1/6th of it cuz the first 5/6 was blah biddy blah blah blah. So we are getting a n ABS_25 error code. Front ABS signal issue apparently. So, I'm going to clean up both front and rear sensors tomorrow after a short ride with my son David.

If that doesn't do it, I'm fucked, as I don't know what to do next.

I tried to activate the rear ABS on the way home from Griff's, went from 50 to 20 just stamping on the rear brake. Rear wheel fish tailed with no pedal vibrator. Double Damn.

Kudos to griff who worked with me in his garage with temps in the mid 90s!
Last edited by wheatonFJR on Sat Aug 24, 2019 9:22 am, edited 1 time in total.
boatanchor, 3rd class.
User avatar
Hppants
Contributor
I post more than I ride
Posts: 7005
Joined: Wed Oct 19, 2016 9:22 pm
FJRModel: 2021ES
x 13807
x 12776

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by Hppants »

So you have a service manual? There is an entire chapter (50-ish pages) on the ABS system.
"I guess it comes down to a simple choice, really. Get busy living. Or get busy dying."
- Andy Dufresne, Shawshank Redemption

Image
User avatar
FJRoss
Veteran
Posts: 2678
Joined: Sat Apr 14, 2018 7:41 pm
FJRModel: 2011 FJR 1300
2017 BMW F700GS
Location: Fredericton NB (Canada)
x 815
x 2399

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by FJRoss »

Fuse?
Clean sensors.
wheatonFJR
Contributor
I post more than I ride
Posts: 20430
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013-Jwilly Special LD Delivery
Location: Travelers Rest
x 43748
x 18939

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by wheatonFJR »

Hppants wrote: Fri Aug 09, 2019 6:21 pm So you have a service manual? There is an entire chapter (50-ish pages) on the ABS system.
Yes. You say that like I know what I'm looking at. :lol: :lol:
boatanchor, 3rd class.
wheatonFJR
Contributor
I post more than I ride
Posts: 20430
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013-Jwilly Special LD Delivery
Location: Travelers Rest
x 43748
x 18939

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by wheatonFJR »

FJRoss wrote: Fri Aug 09, 2019 6:51 pm Fuse?
Clean sensors.
Will check. Thanks.
boatanchor, 3rd class.
User avatar
bill lumberg
Contributor
Veteran
Posts: 2630
Joined: Tue Jun 30, 2015 1:03 pm
FJRModel: 2018ES/2022ES
x 4058
x 4497
Contact:

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by bill lumberg »

Well. Keep us posted. I’m not convinced that you’re hosed yet, but I’m optimistic about potential outcomes for other people’s problems. Like you, when I have an issue, I only expect the worst.

I only post this to help: Today, I pulled the baffles from my new Yoshi exhaust. I’m already being judged by all the folks who, like me, rightly think that any mod that doesn’t increase performance or LD comfort is an exercise in self flagellation. Due to my bag guards, it’s a drunken street fight to get the hangers off and back on so I can remove the cans to get to the (not spot welded any more, master Glynn) retention screws. It ended up being an hour and a half of cursing, sweat pouring down, only to remove baffles that I’m going to put back in, in two days, all pertaining to exhaust cans that are about as functional as nipple rings. Okay, they may be functional for Oface and Wheaton, I mean for normal people.
Last edited by bill lumberg on Fri Aug 09, 2019 7:36 pm, edited 1 time in total.
#boatanchorsmatter

2022ES
drc32-0
Casual Rider
Posts: 108
Joined: Tue Mar 25, 2014 2:04 pm
FJRModel: 13FJR1300 15 FJ09
x 148
x 174

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by drc32-0 »

I just admit defeat and take it to a Yamaha dealer since I screwed up the ABS on my 04 about 10 years ago.
Good luck!
User avatar
gixxerjasen
I post more than I ride
Posts: 6022
Joined: Thu Feb 21, 2013 5:50 pm
FJRModel: 2007 Yamaha FJR1300AE
Location: DFW
x 5593
x 9256

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by gixxerjasen »

How many ABS failures have we had? Not sure I've heard of any before this. Heck, even I haven't managed to destroy mine, yet, that I am aware of.
YouTube Channel | My Blog
Current Bikes:2007 Yamaha FJR1300AE | 2016 KTM 1190 Adventure R | 2001 Suzuki DRZ-400E | 2020 KTM 500 XCF-W
Son's Bike:2019 Honda CRF250L

I'm here to serve as an example of what NOT to do.
User avatar
bill lumberg
Contributor
Veteran
Posts: 2630
Joined: Tue Jun 30, 2015 1:03 pm
FJRModel: 2018ES/2022ES
x 4058
x 4497
Contact:

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by bill lumberg »

Like.
gixxerjasen wrote: Fri Aug 09, 2019 7:29 pm How many ABS failures have we had? Not sure I've heard of any before this. Heck, even I haven't managed to destroy mine, yet, that I am aware of.
#boatanchorsmatter

2022ES
User avatar
FJRoss
Veteran
Posts: 2678
Joined: Sat Apr 14, 2018 7:41 pm
FJRModel: 2011 FJR 1300
2017 BMW F700GS
Location: Fredericton NB (Canada)
x 815
x 2399

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by FJRoss »

gixxerjasen wrote: Fri Aug 09, 2019 7:29 pm How many ABS failures have we had? Not sure I've heard of any before this. Heck, even I haven't managed to destroy mine, yet, that I am aware of.
There were a BUNCH of ABS failures on the Gen I bikes.
A lot less on the Gen II bikes but I have heard of a couple.
I haven't heard of any on the Gen III+. Yes, they are newer but there are 6 year old Gen III on the road and still no issues (except Wheaton's, of course).
User avatar
1911
Veteran
Posts: 865
Joined: Mon Oct 07, 2013 9:44 am
FJRModel: 2007
Location: Laurens SC
x 371
x 2007

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by 1911 »

Bring the bike and the book down to the farm in the morning and we’ll see if we can figure out what you overeducated engineer types have fubarred
Image
wheatonFJR
Contributor
I post more than I ride
Posts: 20430
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013-Jwilly Special LD Delivery
Location: Travelers Rest
x 43748
x 18939

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by wheatonFJR »

1911 wrote: Fri Aug 09, 2019 8:35 pm Bring the bike and the book down to the farm in the morning and we’ll see if we can figure out what you overeducated engineer types have fubarred
It will have to be some other weekend. I'm riding with my son tomorrow am for a couple hours...won't miss that. I have great brakes for this weekend's rides..just no ABS at the moment.

This is where I just step back and blame jwilly. I mean, is it possible he just ABSed the hell out of this thing running from authorities on the way here????





NAHHHHHHH.
Last edited by wheatonFJR on Sat Aug 10, 2019 7:43 am, edited 1 time in total.
boatanchor, 3rd class.
User avatar
gixxerjasen
I post more than I ride
Posts: 6022
Joined: Thu Feb 21, 2013 5:50 pm
FJRModel: 2007 Yamaha FJR1300AE
Location: DFW
x 5593
x 9256

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by gixxerjasen »

wheatonFJR wrote: Fri Aug 09, 2019 9:00 pm This is where I just step back and blame jwilly. I mean, is it possible he just ABSed the hell out of this thing running from authorities on the way here????
You think JWilly used the brakes at all?
YouTube Channel | My Blog
Current Bikes:2007 Yamaha FJR1300AE | 2016 KTM 1190 Adventure R | 2001 Suzuki DRZ-400E | 2020 KTM 500 XCF-W
Son's Bike:2019 Honda CRF250L

I'm here to serve as an example of what NOT to do.
User avatar
griff
Veteran
Posts: 722
Joined: Fri Jan 18, 2013 11:42 pm
FJRModel: 2014 ES
Location: Greer, SC
x 263
x 756

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by griff »

wheatonFJR wrote: Fri Aug 09, 2019 7:01 pm
Hppants wrote: Fri Aug 09, 2019 6:21 pm So you have a service manual? There is an entire chapter (50-ish pages) on the ABS system.
Yes. You say that like I know what I'm looking at. :lol: :lol:
We need the South Carolina version of dat manual :?
Image
User avatar
John d
Veteran
Posts: 646
Joined: Sat Jan 19, 2013 1:01 pm
FJRModel: 2008A
Location: Normandale ON
x 920
x 640

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by John d »

I ride old school and slow and pretend I don't have ABS, even though my '08 still has the ABS working fine. I exercise them once in awhile on gravel. I'm not worried. Some day I'll put Ray's switch in, but I'm lazy.
User avatar
griff
Veteran
Posts: 722
Joined: Fri Jan 18, 2013 11:42 pm
FJRModel: 2014 ES
Location: Greer, SC
x 263
x 756

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by griff »

Mark - I found the right page in the manual Image
Uncle Hud, wheatonFJR, and escapefjrtist loved this
Image
User avatar
John d
Veteran
Posts: 646
Joined: Sat Jan 19, 2013 1:01 pm
FJRModel: 2008A
Location: Normandale ON
x 920
x 640

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by John d »

I guess I'd be upset too if my new to me bike wasn't properly fetteled.
rbentnail
Contributor
Veteran
Posts: 1180
Joined: Sun Jan 20, 2013 4:54 am
FJRModel: 2007A, 2013A
Location: Asheboro, NC
x 425
x 1192

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by rbentnail »

What did you use to jump out the ABS Test Connector? If not the factory or Ray's contraption, it's easy to muck it up.
wheatonFJR
Contributor
I post more than I ride
Posts: 20430
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013-Jwilly Special LD Delivery
Location: Travelers Rest
x 43748
x 18939

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by wheatonFJR »

Need a damn like button for SOME of these posts.

Russ, used a factory jumper. I'm going to be looking for a fuse, if I can figger out which one it is...and clean the ABS sensors like Ross said. If it's the fuse I would be wondering why it blew.
boatanchor, 3rd class.
wheatonFJR
Contributor
I post more than I ride
Posts: 20430
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013-Jwilly Special LD Delivery
Location: Travelers Rest
x 43748
x 18939

Re: I hope I don't, but I might have a malfunctioning ABS block

Post by wheatonFJR »

1911 wrote: Fri Aug 09, 2019 8:35 pm ...and we’ll see if we can figure out what you overeducated engineer types have fubarred
:withstupid:
:mrgreen: :mrgreen: :mrgreen:
boatanchor, 3rd class.
Post Reply