The 2025 Calendar is now available for purchase! Click here for purchase links!

Jolene, Jolene, Jolene...

Our rides evolve - keep track of yours here.
Post Reply
User avatar
Festus
Contributor
Veteran
Posts: 4931
Joined: Tue Mar 28, 2017 3:40 pm
FJRModel: 2013 FJR, 2023 KTM 390 Adventure
x 4099
x 11098

Jolene, Jolene, Jolene...

Post by Festus »

First of all, if you don't know where the reference Jolene comes from, shut off your computer or smart device and stop reading this thread, you poor, uncultured creature. And NO, it was not Miley Cyrus that invented it.

LKLD's faithful race horse suffered a broken leg and while trying to recuperate, was attached by an angry rabid baby alligator (that's my story, it was in Florida, you know) and she was down for the count.

Dr. Festus heard of her injury and dispatched on a 12 hour ride to pick the sick girl up. 850 miles later and a pit stop for seafood at Daytona Beach, and an anxious night of sleep, we arrived at Rob's. Poor girl, made my heart hurt seeing her broken. I knew it hurt Rob as well. But I knew how much they loved her when they talked about Jolene and when Rob's wife walked out and hugged Jolene goodbye, I knew we had to take good care of her.

After a few minutes of talk, we got the girl onto the truck and strapped her down. 850 miles down, 850 to go!

Image

What we know at this point :

1) Code 19 on dash
2) Code 21 on dash
3) Won't start because of the codes
4) Second gear has an issue under heavy acceleration
5) She was hit in the rear saddlebag, which knocked Rob off, and she went down, scratching the left side fairing,breaking the mirror, and stay. Rob had replaced the stay and mirror.

(yes, I bought it without ever hearing it run. Rob's a stand up guy and was extremely honest about all of it)

Code 19, side stand switch- We take a meter and unplug the switch and measure continuity and the switch is working. Hummm.....switch works, but kicks the code. Okay, let's flip this around. Measure the voltage coming to the switch. Zero. Hummm....no power to switch.

Code 21, Coolant Temperature Sensor not working. It's located on a metal pipe on top of the engine, just above the coils on the plugs.

Okay, let's take a look under the tank and see where this kickstand switch goes. Take the take off and immediately notice there are ZERO wires running to the Coolant Temperature Sensor. How's that work? Is this one of those wireless sensors? I'm so confused. Then it becomes clear, a baby alligator has chewed the wiring harness.

Image

Okay, that's the coolant sensor, what's the deal on the side stand switch? Same damn alligator.... about 3" of wire missing, chewed back to the harness.

Image

After finding the plug and some leads at the Toyota dealer, we jumped some of the wires and a turned the key and no codes! Woohoo! Turn the key a little further and she starts!

Jolene is back to life.

Take a little time buttoning that up, and notice some hesitation in the throttle. Dr. Festus hooks the girl up and checks her readings...

Image

Ahhh.....no wonder she's feeling under the weather. Also notice that the #2 cylinder rubber plug is missing the clip. Making a note to order the clip. Don't need that vacuum leak later.

Get it all back together and it's time for Jolene to hit the road. A race horse needs to run.

Image

A short trip and a twist of the throttle in second gear and her problem is obvious. WOW....not good. Poor girl. Pull off from a stop and wind first up to about 8,000, and it rock solid, skipped over second, into third and it's rock solid too. No issues with fourth either. Seems isolated to second.

Pull her back into the stable for the day. Dr. Festus reporting for surgery very soon....
PhilJet09, LKLD, wheatonFJR and 1 others loved this
"That wasn’t as bad as I thought it would be" - 1911

"Stay thirsty, my friends"....... Wouldn't that mean I'm dehydrated all the time?
User avatar
gixxerjasen
I post more than I ride
Posts: 6051
Joined: Thu Feb 21, 2013 5:50 pm
FJRModel: 2007 Yamaha FJR1300AE
Location: DFW
x 5628
x 9309

Re: Jolene, Jolene, Jolene...

Post by gixxerjasen »

Sorry, I'm too young for the original reference, but too old for the Miley reference.

Interested in seeing where this goes though.
YouTube Channel | My Blog
Current Bikes:2007 Yamaha FJR1300AE | 2016 KTM 1190 Adventure R | 2001 Suzuki DRZ-400E | 2020 KTM 500 XCF-W
Son's Bike:2019 Honda CRF250L

I'm here to serve as an example of what NOT to do.
User avatar
El Toro Joe
Contributor
Veteran
Posts: 4555
Joined: Sat Jan 19, 2013 3:22 pm
FJRModel: 2016ES
Location: North Coast of Ohio
x 9675
x 3656

Re: Jolene, Jolene, Jolene...

Post by El Toro Joe »

Take good care of that big girl, doc...she's a beauty.
LKLD and wheatonFJR loved this
"RIP Beemerdons", "RIP Petey", "RIP JWilly", "RIP 1911"
User avatar
raYzerman
Contributor
I post more than I ride
Posts: 9753
Joined: Mon Mar 18, 2013 10:49 am
FJRModel: 2010 Honda CBF1000FA
Location: Millgrove, Ontario, CA
x 3183
x 11739

Re: Jolene, Jolene, Jolene...

Post by raYzerman »

If you're talking about the little metal clip on the throttle sync caps, fuggedaboudit, they won't leak or fall off. But you could go find some longer maybe heavier duty caps to make it easier to get them on and off.
fontanaman, Bust, and Festus loved this
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
User avatar
bungie4
I post more than I ride
Posts: 7073
Joined: Sat Jan 19, 2013 7:43 pm
FJRModel: 2013 FJR 1300
x 3809
x 6523

Re: Jolene, Jolene, Jolene...

Post by bungie4 »

I've bought those friggen caps a couple of times. I always loose or tear one. ... And I can never find my donated ever!
WWPD.
#SnowMexican
Choo choo mf'r.
D.F.I.U.N.
User avatar
fencer
Veteran
Posts: 939
Joined: Sat Jan 19, 2013 12:07 am
FJRModel: 2006 *SOLD now 2018
x 215
x 274

Re: Jolene, Jolene, Jolene...

Post by fencer »

I have had the same issue with 2nd gear for 30k miles,

I suspect a bent dog bone
Just here to show my ass --------->>>>>>>>
User avatar
LKLD
Contributor
Veteran
Posts: 2871
Joined: Sun Feb 03, 2013 10:26 am
FJRModel: 2016 ES
Location: East Tennessee
x 5730
x 3719

Re: Jolene, Jolene, Jolene...

Post by LKLD »

We got the bike up in easy-peasy, with Steve, my son Sean, Steve (YummYam), Don and myself. No YouTube video shaming for this load-up. ;)
Image

Here is Steve's parents, Florence and Don. Don is a gentleman, and enthused about Steve's new project. Florence exemplifies a southern lady, with grace and charm.
Image

All loaded and tied down. It was a bit melancholy watching Jolene leave on Steve's truck, but after conversing him through email and meeting him in person, I knew she was in the best of hands.
Image

All the best, Steve!
wheatonFJR loved this
Being alive, is not living. R.I.P. Don,Petey, & Jason レイクランド
User avatar
Festus
Contributor
Veteran
Posts: 4931
Joined: Tue Mar 28, 2017 3:40 pm
FJRModel: 2013 FJR, 2023 KTM 390 Adventure
x 4099
x 11098

Re: Jolene, Jolene, Jolene...

Post by Festus »

Thanks for the kind words Rob! Greatly appreciated.

Jolene and her baby sister, Eleanor (Gone in 60 Seconds reference) decided to step out into the sun for a bit today.

Jolene thought she was getting a bath, but she's really being prep'd for surgery. Eleanor watched from a distance.

Image

Image

Image

Image
LKLD and wheatonFJR loved this
"That wasn’t as bad as I thought it would be" - 1911

"Stay thirsty, my friends"....... Wouldn't that mean I'm dehydrated all the time?
wheatonFJR
Contributor
I post more than I ride
Posts: 20530
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013-Jwilly Special LD Delivery
Location: Travelers Rest
x 44123
x 19077

Re: Jolene, Jolene, Jolene...

Post by wheatonFJR »

Only thing better than a 13?

TWO 13s!!
Hppants, Festus, bungie4 and 1 others loved this
boatanchor, 3rd class.
User avatar
Viper_Dad
Member
Posts: 262
Joined: Fri Jan 19, 2018 4:35 pm
FJRModel: 2013
Location: Virginia, USA
x 467
x 466

Re: Jolene, Jolene, Jolene...

Post by Viper_Dad »

You sure seem like a handy guy to have around. I'm following this build VERY closely!
2013 - "Jolene"
Peter
User avatar
Festus
Contributor
Veteran
Posts: 4931
Joined: Tue Mar 28, 2017 3:40 pm
FJRModel: 2013 FJR, 2023 KTM 390 Adventure
x 4099
x 11098

Re: Jolene, Jolene, Jolene...

Post by Festus »

Viper_Dad wrote: Mon Jan 22, 2018 10:52 am You sure seem like a handy guy to have around. I'm following this build VERY closely!
VERY closely? I hope so, you're going to help me do it :)
wheatonFJR and El Toro Joe loved this
"That wasn’t as bad as I thought it would be" - 1911

"Stay thirsty, my friends"....... Wouldn't that mean I'm dehydrated all the time?
User avatar
Viper_Dad
Member
Posts: 262
Joined: Fri Jan 19, 2018 4:35 pm
FJRModel: 2013
Location: Virginia, USA
x 467
x 466

Re: Jolene, Jolene, Jolene...

Post by Viper_Dad »

Festus wrote: Mon Jan 22, 2018 12:54 pm
VERY closely? I hope so, you're going to help me do it :)
... and then I'm going to steal her from you with my charm!
2013 - "Jolene"
Peter
User avatar
Festus
Contributor
Veteran
Posts: 4931
Joined: Tue Mar 28, 2017 3:40 pm
FJRModel: 2013 FJR, 2023 KTM 390 Adventure
x 4099
x 11098

Re: Jolene, Jolene, Jolene...

Post by Festus »

Let's just start at helping me lift the engine.
wheatonFJR loved this
"That wasn’t as bad as I thought it would be" - 1911

"Stay thirsty, my friends"....... Wouldn't that mean I'm dehydrated all the time?
User avatar
Uncle Hud
Veteran
Posts: 3575
Joined: Thu Dec 08, 2016 1:52 pm
FJRModel: 2015 ES, with new fairings!
Location: Smyrna, metro Atlanta
x 7246
x 2758

Re: Jolene, Jolene, Jolene...

Post by Uncle Hud »

gixxerjasen wrote: Sat Jan 20, 2018 10:36 pm Sorry, I'm too young for the original reference, but too old for the Miley reference.
In case you're not kidding, I'll summarize: "Jolene, please don't take my man just because you can."

Obviously named by LKLD's wife ....
LKLD loved this
*** You can't get into trouble in second gear. ***
IBA 62517
User avatar
gixxerjasen
I post more than I ride
Posts: 6051
Joined: Thu Feb 21, 2013 5:50 pm
FJRModel: 2007 Yamaha FJR1300AE
Location: DFW
x 5628
x 9309

Re: Jolene, Jolene, Jolene...

Post by gixxerjasen »

Uncle Hud wrote: Mon Jan 22, 2018 6:29 pm
gixxerjasen wrote: Sat Jan 20, 2018 10:36 pm Sorry, I'm too young for the original reference, but too old for the Miley reference.
In case you're not kidding, I'll summarize: "Jolene, please don't take my man just because you can."

Obviously named by LKLD's wife ....
I kinda wasn't. :D

In reference to your sig line, I can get into trouble on my new bike in first gear. :lol:
Uncle Hud loved this
YouTube Channel | My Blog
Current Bikes:2007 Yamaha FJR1300AE | 2016 KTM 1190 Adventure R | 2001 Suzuki DRZ-400E | 2020 KTM 500 XCF-W
Son's Bike:2019 Honda CRF250L

I'm here to serve as an example of what NOT to do.
User avatar
LKLD
Contributor
Veteran
Posts: 2871
Joined: Sun Feb 03, 2013 10:26 am
FJRModel: 2016 ES
Location: East Tennessee
x 5730
x 3719

Re: Jolene, Jolene, Jolene...

Post by LKLD »

Uncle Hud wrote: Mon Jan 22, 2018 6:29 pm

Obviously named by LKLD's wife ....
Winner, winner, chicken dinner! :lol:
Viper_Dad loved this
Being alive, is not living. R.I.P. Don,Petey, & Jason レイクランド
User avatar
Festus
Contributor
Veteran
Posts: 4931
Joined: Tue Mar 28, 2017 3:40 pm
FJRModel: 2013 FJR, 2023 KTM 390 Adventure
x 4099
x 11098

Re: Jolene, Jolene, Jolene...

Post by Festus »

Only had about an hour tonight so didn't get much done. It's not at my house, so I have to make time to get to it.

Just did some prep work, drained the oil, took the plastic off, air filter out, mufflers off, drained the gas, took the tank off, battery disconnected.

Image

Quick question, do I need this or is there a work around?

Image

Interesting note on that page, read it.

"Removing the Engine"
1) Loosen:
-Spacer Bolt

Next step is :

"Installing the Engine"

So let me see if I understand this right, if I loosen the 1 spacer bolt, the entire engine comes out? Got it.
"That wasn’t as bad as I thought it would be" - 1911

"Stay thirsty, my friends"....... Wouldn't that mean I'm dehydrated all the time?
User avatar
Viper_Dad
Member
Posts: 262
Joined: Fri Jan 19, 2018 4:35 pm
FJRModel: 2013
Location: Virginia, USA
x 467
x 466

Re: Jolene, Jolene, Jolene...

Post by Viper_Dad »

You did all of that in an hour? Can’t wait to see what you do with a Saturday afternoon! Now get moving onto those many, many removal steps.
2013 - "Jolene"
Peter
User avatar
gixxerjasen
I post more than I ride
Posts: 6051
Joined: Thu Feb 21, 2013 5:50 pm
FJRModel: 2007 Yamaha FJR1300AE
Location: DFW
x 5628
x 9309

Re: Jolene, Jolene, Jolene...

Post by gixxerjasen »

Festus wrote: Mon Jan 22, 2018 9:33 pmInteresting note on that page, read it.

"Removing the Engine"
1) Loosen:
-Spacer Bolt

Next step is :

"Installing the Engine"

So let me see if I understand this right, if I loosen the 1 spacer bolt, the entire engine comes out? Got it.
I previously found a similar one. To remove the rear shock, remove the bottom bolt, then remove the top bolt, remove shock.

If only it were so easy.

Yamaha tech writers are lazy assholes.
Abercrombie FJR loved this
YouTube Channel | My Blog
Current Bikes:2007 Yamaha FJR1300AE | 2016 KTM 1190 Adventure R | 2001 Suzuki DRZ-400E | 2020 KTM 500 XCF-W
Son's Bike:2019 Honda CRF250L

I'm here to serve as an example of what NOT to do.
User avatar
danh600
Veteran
Posts: 4523
Joined: Tue Mar 25, 2014 3:36 pm
FJRModel: 2022 FJR1300ES
Location: Roughedge,NC
x 5384
x 9495

Re: Jolene, Jolene, Jolene...

Post by danh600 »

I really want to see this bike going again. I have the same bike and rode with Rob many times.

I hate seeing that bike like that.
LKLD loved this
Post Reply