The 2025 Calendar Voting is now live! Click here to vote!

Replacing Gen 3 emergency flasher button assembly?

Tech section strictly for the FJR. Everything from oil changes & suspension setup's to removing sheep hair from hard to reach places on the bike so that your wife never finds out.
Post Reply
User avatar
griff
Veteran
Posts: 722
Joined: Fri Jan 18, 2013 11:42 pm
FJRModel: 2014 ES
Location: Greer, SC
x 263
x 756

Replacing Gen 3 emergency flasher button assembly?

Post by griff »

I have had ongoing issues with my emergency flasher button sticking on. I have lubricated it and it still continues to stick, so I am contemplating replacing it. Just wondering if anyone has replaced this item on a Gen 3. It's a separate attachment on the right handle bar with a plug that connects somewhere in the bike innards, but I don't know exactly where it connects. I have YES so I can get it replaced at a dealer, but I would prefer to get the new part and replace it myself, since I don't have a lot of faith in the local dealer.
Image
User avatar
raYzerman
Contributor
I post more than I ride
Posts: 9676
Joined: Mon Mar 18, 2013 10:49 am
FJRModel: 2010 Honda CBF1000FA
Location: Millgrove, Ontario, CA
x 3131
x 11588

Re: Replacing Gen 3 emergency flasher button assembly?

Post by raYzerman »

Not sure where the right switch connects, but the left one has a connector in the nose. Remove windshield, front dash panel and the "vent panel" on top of the nose. There are two screws as you look at if from the front, and it unsnaps off the top of the instrument panel. Bottom line, you should be able to follow the wire harness, and if it leads to a path under the instruments and forward, the connectors are likely in the nose. On Gen3 the instrument cluster is a computer of sorts, and has the flasher function built into it.
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
User avatar
NTXFJR
Contributor
Veteran
Posts: 1814
Joined: Sat Oct 22, 2016 7:17 pm
FJRModel: 2016 FJR1300A
Location: Midlothian, Tx
x 2889
x 1511

Re: Replacing Gen 3 emergency flasher button assembly?

Post by NTXFJR »

May have to replace the whole switch pod assy? What Ray said, connections for the left side switch harness are up in the nose. I'd bet the right side goes to the same place. 15 minutes will get you in there.

http://www.partzilla.com/parts/detail/y ... 00-00.html
We travel not to escape life, but for life not to escape us.

Image

IBA # 65427
User avatar
griff
Veteran
Posts: 722
Joined: Fri Jan 18, 2013 11:42 pm
FJRModel: 2014 ES
Location: Greer, SC
x 263
x 756

Re: Replacing Gen 3 emergency flasher button assembly?

Post by griff »

Switch is relatively cheap. I may just take loose the switch assembly and see if can clean it out and get it functioning properly. No way this bike is going near the dealer here.
raYzerman and wheatonFJR loved this
Image
User avatar
raYzerman
Contributor
I post more than I ride
Posts: 9676
Joined: Mon Mar 18, 2013 10:49 am
FJRModel: 2010 Honda CBF1000FA
Location: Millgrove, Ontario, CA
x 3131
x 11588

Re: Replacing Gen 3 emergency flasher button assembly?

Post by raYzerman »

griff wrote: Sat May 13, 2017 10:50 am Switch is relatively cheap. I may just take loose the switch assembly and see if can clean it out and get it functioning properly. No way this bike is going near the dealer here.
Good idea, I was going to suggest you go in and see if the original switch can be cleaned up. No way it should have failed yet...........
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
User avatar
griff
Veteran
Posts: 722
Joined: Fri Jan 18, 2013 11:42 pm
FJRModel: 2014 ES
Location: Greer, SC
x 263
x 756

Re: Replacing Gen 3 emergency flasher button assembly?

Post by griff »

Well it's not that old, but has 83K on it. Button engages, but does not release when pushed in. If I take my fingernail and push on the edge of the button and let it spring back up it will release. Maybe a lot of gunk in there, I don't know. So, as you described above - I can take a look under the nose by following your directions above? And this is on a Gen 3, right? The front dash panel you refer to is the black piece I removed when getting at mirror mounts, right?
Image
User avatar
NTXFJR
Contributor
Veteran
Posts: 1814
Joined: Sat Oct 22, 2016 7:17 pm
FJRModel: 2016 FJR1300A
Location: Midlothian, Tx
x 2889
x 1511

Re: Replacing Gen 3 emergency flasher button assembly?

Post by NTXFJR »

On a Gen III there is a space in the nose between the gauges and the headlights with several harness connections. This pic was taken when I was accessing the left side turn signal switch assy connections to install the auto turn signal cancel unit.


Image
We travel not to escape life, but for life not to escape us.

Image

IBA # 65427
User avatar
bungie4
I post more than I ride
Posts: 6978
Joined: Sat Jan 19, 2013 7:43 pm
FJRModel: 2013 FJR 1300
x 3766
x 6388

Re: Replacing Gen 3 emergency flasher button assembly?

Post by bungie4 »

griff wrote: Sun May 14, 2017 1:09 pm Well it's not that old, but has 83K on it.
You have 83K on your 13? You beast!
WWPD.
#SnowMexican
Choo choo mf'r.
D.F.I.U.N.
User avatar
John d
Veteran
Posts: 646
Joined: Sat Jan 19, 2013 1:01 pm
FJRModel: 2008A
Location: Normandale ON
x 920
x 640

Re: Replacing Gen 3 emergency flasher button assembly?

Post by John d »

NTXFJR wrote: Sun May 14, 2017 2:53 pm On a Gen III there is a space in the nose between the gauges and the headlights with several harness connections. This pic was taken when I was accessing the left side turn signal switch assy connections to install the auto turn signal cancel unit.


Image

Just so you know, the arrow on the STS unit should point forward, not sideways.
wheatonFJR
Contributor
I post more than I ride
Posts: 20435
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013-Jwilly Special LD Delivery
Location: Travelers Rest
x 43762
x 18945

Re: Replacing Gen 3 emergency flasher button assembly?

Post by wheatonFJR »

bungie4 wrote: Wed May 17, 2017 1:29 pm
griff wrote: Sun May 14, 2017 1:09 pm Well it's not that old, but has 83K on it.
You have 83K on your 13? You beast!
No.

He has 83k on his 14.
boatanchor, 3rd class.
User avatar
bungie4
I post more than I ride
Posts: 6978
Joined: Sat Jan 19, 2013 7:43 pm
FJRModel: 2013 FJR 1300
x 3766
x 6388

Re: Replacing Gen 3 emergency flasher button assembly?

Post by bungie4 »

wheatonFJR wrote: Wed May 17, 2017 4:10 pm
bungie4 wrote: Wed May 17, 2017 1:29 pm
griff wrote: Sun May 14, 2017 1:09 pm Well it's not that old, but has 83K on it.
You have 83K on your 13? You beast!
No.

He has 83k on his 14.
I stand corrected. Fuggin' retired guys. The last two years have been all time lows for me as far as seasonal mileage goes. I'm so ashamed.
Uncle Hud loved this
WWPD.
#SnowMexican
Choo choo mf'r.
D.F.I.U.N.
User avatar
NTXFJR
Contributor
Veteran
Posts: 1814
Joined: Sat Oct 22, 2016 7:17 pm
FJRModel: 2016 FJR1300A
Location: Midlothian, Tx
x 2889
x 1511

Re: Replacing Gen 3 emergency flasher button assembly?

Post by NTXFJR »

John d wrote: Wed May 17, 2017 3:09 pm
NTXFJR wrote: Sun May 14, 2017 2:53 pm On a Gen III there is a space in the nose between the gauges and the headlights with several harness connections. This pic was taken when I was accessing the left side turn signal switch assy connections to install the auto turn signal cancel unit.


Image

Just so you know, the arrow on the STS unit should point forward, not sideways.
This unit works very well, it doesn't appear to have made a difference in this case.
We travel not to escape life, but for life not to escape us.

Image

IBA # 65427
User avatar
Uncle Hud
Veteran
Posts: 3575
Joined: Thu Dec 08, 2016 1:52 pm
FJRModel: 2015 ES, with new fairings!
Location: Smyrna, metro Atlanta
x 7246
x 2758

Re: Replacing Gen 3 emergency flasher button assembly?

Post by Uncle Hud »

Griff is a big-mileage animal .... so, Griff, why are you using the emergency flasher so often that you've broken it?
*** You can't get into trouble in second gear. ***
IBA 62517
User avatar
NTXFJR
Contributor
Veteran
Posts: 1814
Joined: Sat Oct 22, 2016 7:17 pm
FJRModel: 2016 FJR1300A
Location: Midlothian, Tx
x 2889
x 1511

Re: Replacing Gen 3 emergency flasher button assembly?

Post by NTXFJR »

Uncle Hud wrote: Wed May 17, 2017 6:34 pm Griff is a big-mileage animal .... so, Griff, why are you using the emergency flasher so often that you've broken it?
Must be that permanent rally mode parking that did it in.
We travel not to escape life, but for life not to escape us.

Image

IBA # 65427
User avatar
griff
Veteran
Posts: 722
Joined: Fri Jan 18, 2013 11:42 pm
FJRModel: 2014 ES
Location: Greer, SC
x 263
x 756

Re: Replacing Gen 3 emergency flasher button assembly?

Post by griff »

Uncle Hud wrote: Wed May 17, 2017 6:34 pm Griff is a big-mileage animal .... so, Griff, why are you using the emergency flasher so often that you've broken it?
Actually, I haven't used it much. Almost never in the last few months, since I can't get the damn thing to shut off.
Uncle Hud loved this
Image
wheatonFJR
Contributor
I post more than I ride
Posts: 20435
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013-Jwilly Special LD Delivery
Location: Travelers Rest
x 43762
x 18945

Re: Replacing Gen 3 emergency flasher button assembly?

Post by wheatonFJR »

I'm guessing on the sidewalk and right lane of every city in the U.S....during rush hour.
boatanchor, 3rd class.
User avatar
Uncle Hud
Veteran
Posts: 3575
Joined: Thu Dec 08, 2016 1:52 pm
FJRModel: 2015 ES, with new fairings!
Location: Smyrna, metro Atlanta
x 7246
x 2758

Re: Replacing Gen 3 emergency flasher button assembly?

Post by Uncle Hud »

Don't need flashers if you're parked on the sidewalk.Image
*** You can't get into trouble in second gear. ***
IBA 62517
wheatonFJR
Contributor
I post more than I ride
Posts: 20435
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013-Jwilly Special LD Delivery
Location: Travelers Rest
x 43762
x 18945

Re: Replacing Gen 3 emergency flasher button assembly?

Post by wheatonFJR »

Uncle Hud wrote: Thu May 18, 2017 10:01 am Don't need flashers if you're parked on the sidewalk.Image
Yebbut, iffn yer in a real city, you might need 'em.

Evidently not a lot of pedestrians around there.
boatanchor, 3rd class.
User avatar
Uncle Hud
Veteran
Posts: 3575
Joined: Thu Dec 08, 2016 1:52 pm
FJRModel: 2015 ES, with new fairings!
Location: Smyrna, metro Atlanta
x 7246
x 2758

Re: Replacing Gen 3 emergency flasher button assembly?

Post by Uncle Hud »

If my flashers will prevent PEDESTRIANS from crashing into my bike .... well, I must be in the drinking part of town.
*** You can't get into trouble in second gear. ***
IBA 62517
Post Reply