Hello

uscs344 · Post by **uscs344** » Thu Oct 27, 2016 4:24 pm

High all current owner of a 07 FJR. Reside in the Birmingham Alabama Area. I've had the bike for about two years now and honestly I absolutely hated it with its snappy throttle. Finally put on an old Power commander III with Walley's smoothness map and man what a big improvement. Finally enjoying the bike and have rode it everyday since.

0face · Post by **0face** » Thu Oct 27, 2016 4:27 pm

Sweet! Welcome aboard!!

wheatonFJR · Post by **wheatonFJR** » Thu Oct 27, 2016 4:53 pm

Welcome!

ts3doug · Post by **ts3doug** » Thu Oct 27, 2016 5:13 pm

Howdy sir!

Harald · Post by **Harald** » Thu Oct 27, 2016 5:18 pm

Welcome from a fellow 07 owner.
I run a PC III on mine also to reduce the FI induced snatchiness. A couple other things that help is to make sure all play is removed in the throttle cable and install a G2 throttle tamer: http://www.g2ergo.com/store/g2-street-t ... ttle-tube/
The G2 tube has a modified cam profile that eases the off/on throttle transition. It's possible to take a dremel tool to the stock cam, but this tube is the sure thing if you're not comfortable shaving plastic with a dremel bit.

uscs344 · Post by **uscs344** » Thu Oct 27, 2016 5:26 pm

Harald wrote:Welcome from a fellow 07 owner.
I run a PC III on mine also to reduce the FI induced snatchiness. A couple other things that help is to make sure all play is removed in the throttle cable and install a G2 throttle tamer: http://www.g2ergo.com/store/g2-street-t ... ttle-tube/
The G2 tube has a modified cam profile that eases the off/on throttle transition. It's possible to take a dremel tool to the stock cam, but this tube is the sure thing if you're not comfortable shaving plastic with a dremel bit.

Thanks for the advise Ill look into it. The induced snatchiness was too much for me and I was ready to get rid of the bike. Now I am just mad at myself for taking a year to put on the PCIII. It had been sitting in the tool box and I just forgot all about it.

raYzerman · Post by **raYzerman** » Thu Oct 27, 2016 5:43 pm

Welcome...... let us know how the mileage is...... I might have a map you can use if it seems to run rich....

fontanaman · Post by **fontanaman** » Thu Oct 27, 2016 10:15 pm

wheatonFJR wrote:Welcome!

Welcome to the forum. It is a nice place the admins have set up here. I have to admit I am tired of being screwed by WheatonFJR.

wheatonFJR · Post by **wheatonFJR** » Thu Oct 27, 2016 10:26 pm

fontanaman wrote:
wheatonFJR wrote:Welcome!
Welcome to the forum. It is a nice place the admins have set up here. I have to admit I am tired of being screwed by WheatonFJR.

uscs344 · Post by **uscs344** » Fri Oct 28, 2016 6:58 am

raYzerman wrote:Welcome...... let us know how the mileage is...... I might have a map you can use if it seems to run rich....

Mileage is about 36 to 37 mpg if I'm easy on the throttle. I'd love to have a copy of your map if available. Thanks. My fjr is stock exhaust and stock air filter o2 sensor disconnected. Thankd

raYzerman · Post by **raYzerman** » Fri Oct 28, 2016 7:52 am

The smoothness map was a bit rich, but did perhaps improve performance, at the expense of gas mileage. I'm going to say use the stock map that comes with a PCV, adapted for PCIII...... swapped that out on BillyFitz bike this summer, as he was fillling up a lot sooner than the rest of us... to me, no need to be as rich as the smoothness maps. Lemme look in my map collection, expect a PM one day soon.

LKLD · Post by **LKLD** » Fri Oct 28, 2016 10:28 am

Welcome to the forum!

uscs344 · Post by **uscs344** » Fri Oct 28, 2016 6:59 pm

raYzerman wrote:The smoothness map was a bit rich, but did perhaps improve performance, at the expense of gas mileage. I'm going to say use the stock map that comes with a PCV, adapted for PCIII...... swapped that out on BillyFitz bike this summer, as he was fillling up a lot sooner than the rest of us... to me, no need to be as rich as the smoothness maps. Lemme look in my map collection, expect a PM one day soon.

Thanks I would love to try it!

uscs344 · Post by **uscs344** » Fri Oct 28, 2016 7:00 pm

Thanks everyone for the Welcomes!!!

Majicmaker · Post by **Majicmaker** » Fri Oct 28, 2016 7:51 pm

Welcome! From West Palm Beach, FL

FJRiders.com

Hello

Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: RE: Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello