Canyon Cages with MCL highway pegs

jsaul53 · Post by **jsaul53** » Wed Apr 23, 2014 10:21 pm

Has anyone tried the motorcycle larry highway pegs with the canyon cages? I have fitted pegs on the canyon cages but was not quite what I want for long distance riding.

Auburn · Post by **Auburn** » Thu Apr 24, 2014 3:25 pm

Here is mine with Garauld's pegs. I didn't like them as well and got some Kuryakan (sp?) pegs instead. I don't have any pictures of the Kuryakan pegs right now. But I do like them more.

hollywoodgt · Post by **hollywoodgt** » Fri Apr 25, 2014 11:22 pm

What clamp are u using and where did u get it

silverback · Post by **silverback** » Sat Apr 26, 2014 12:02 am

It would be hellaciously expensive, but Kuryakyn makes pegs that would clamp to those, I have a set on the case guards of my XS11. They are very nice.

Sent from my XT1080 using Tapatalk

Auburn · Post by **Auburn** » Sat Apr 26, 2014 11:12 am

hollywoodgt wrote:What clamp are u using and where did u get it

I get them from Dennis kirk/drag specialties: https://www.denniskirk.com/drag-special ... 273458.sku

jsaul53 · Post by **jsaul53** » Mon Apr 28, 2014 10:59 pm

I have a similar setup to what you show in the pictures and just not a big fan of the location. I can't lengthen my legs so I am looking to bring the pegs closer is why I am looking at the MCL pegs. I saw on one of the other forums where someone has done it with some modifications.

Auburn · Post by **Auburn** » Tue Apr 29, 2014 12:00 am

jsaul53 wrote:I have a similar setup to what you show in the pictures and just not a big fan of the location. I can't lengthen my legs so I am looking to bring the pegs closer is why I am looking at the MCL pegs. I saw on one of the other forums where someone has done it with some modifications.

I got a chance to get pictures of my current set up for pegs. They are Kuryan with a 3" offset piece to allow more adjustability

jsaul53 · Post by **jsaul53** » Tue Apr 29, 2014 10:14 pm

Thanks for posting the pictures of your new setup. I do like the looks of that.

raYzerman · Post by **raYzerman** » Wed Apr 30, 2014 8:23 am

You can get the clamps at Rivco also. Reverse the clamps to point backwards is another option to bring them closer.......

atourville · Post by **atourville** » Sun May 18, 2014 7:05 am

Will the same work between the GEN2 & GEN3 Cages?

HotRodZilla · Post by **HotRodZilla** » Sun May 18, 2014 1:46 pm

Be careful. Those look like they are gonna drag very early. Just be aware of your limits.

Auburn · Post by **Auburn** » Mon May 19, 2014 11:23 pm

atourville wrote:Will the same work between the GEN2 & GEN3 Cages?

the gen 2 cages are made out of 7/8" tube and the gen 3 cages are 1" tube. Just make sure you order the right diameter tube clamp and you will be fine.

jsaul53 · Post by **jsaul53** » Sun Jun 15, 2014 11:02 pm

I reversed the clamps as suggested by raYzerman. On a short ride it appears to be what I needed. Next SS1000 will be the real test.

Post by **nvmike24** » Mon Jul 14, 2014 7:07 pm

This is what I'm looking to do but I think I need them a lil wider. Clamps are perfect. Thanks

Auburn · Post by **Auburn** » Tue Jul 15, 2014 2:46 pm

HotRodZilla wrote:Be careful. Those look like they are gonna drag very early. Just be aware of your limits.

Yeah, I have aftermarket suspension. Where they are located, they won't drag before the foot pegs do.

FJRiders.com

Canyon Cages with MCL highway pegs

Canyon Cages with MCL highway pegs

Re: Canyon Cages with MCL highway pegs

Re: Canyon Cages with MCL highway pegs

Re: Canyon Cages with MCL highway pegs

Re: Canyon Cages with MCL highway pegs

Re: Canyon Cages with MCL highway pegs

Re: Canyon Cages with MCL highway pegs

Re: Canyon Cages with MCL highway pegs

Re: Canyon Cages with MCL highway pegs

Re: Canyon Cages with MCL highway pegs

Re: Canyon Cages with MCL highway pegs

Re: Canyon Cages with MCL highway pegs

Re: Canyon Cages with MCL highway pegs

Re: Canyon Cages with MCL highway pegs

Re: Canyon Cages with MCL highway pegs