chasing a intermittent head light problem. Noticeable at night.
All of a sudden headlights go out. Then will come back on (only headlights)
When I was at EOM23 someone was nice enough and said they could email a schematic for the 05 but i had forgot all about it till now.
I am elbow deep in the front end to get at the relays.
My question is, Who was I talking to at EOM23?
The 2025 Calendar Voting is now live! Click here to vote!
wiring schematic 05
-
Boston
- Member
- Posts: 166
- Joined: Thu Feb 14, 2019 2:54 pm
- FJRModel: 2005 FJR1300 2001 Roadstar
- x 105
- x 167
-
LKLD
- Contributor
- Veteran
- Posts: 2841
- Joined: Sun Feb 03, 2013 10:26 am
- FJRModel: 2016 ES
- Location: Central Flatistan
- x 5659
- x 3600
Re: wiring schematic 05
Maybe raYzerman, he has all the info.
Being alive, is not living. R.I.P. Don,Petey, & Jason レイクランド
-
raYzerman
- Contributor
- I post more than I ride
- Posts: 9674
- Joined: Mon Mar 18, 2013 10:49 am
- FJRModel: 2010 Honda CBF1000FA
- Location: Millgrove, Ontario, CA
- x 3129
- x 11581
Re: wiring schematic 05
PM me with your email address, I'll send you a manual.......
wheatonFJR and CollingsBob loved this
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
Duct tape can't fix stupid, but it can sure muffle the sound.
-
wheatonFJR
- Contributor
- I post more than I ride
- Posts: 20430
- Joined: Wed Jan 16, 2013 6:10 pm
- FJRModel: 2013-Jwilly Special LD Delivery
- Location: Travelers Rest
- x 43741
- x 18939
-
Boston
- Member
- Posts: 166
- Joined: Thu Feb 14, 2019 2:54 pm
- FJRModel: 2005 FJR1300 2001 Roadstar
- x 105
- x 167
Re: wiring schematic 05
With the front Tupperware off i can get to the relays and check pin fitment which may be the issue.
There is one wire in a connector under that gets hot. (under the tank) I removed it from the connector and joined it together outside of its buddies. And the lights went out again. (thought it was headlight feed) There is not any green crusties anywhere. So this makes me think relay pins.
Thanks for the help.
There is one wire in a connector under that gets hot. (under the tank) I removed it from the connector and joined it together outside of its buddies. And the lights went out again. (thought it was headlight feed) There is not any green crusties anywhere. So this makes me think relay pins.
Thanks for the help.
IBA# 76760
-
raYzerman
- Contributor
- I post more than I ride
- Posts: 9674
- Joined: Mon Mar 18, 2013 10:49 am
- FJRModel: 2010 Honda CBF1000FA
- Location: Millgrove, Ontario, CA
- x 3129
- x 11581
Re: wiring schematic 05
PM replied, you have mail.
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
Duct tape can't fix stupid, but it can sure muffle the sound.
-
Boston
- Member
- Posts: 166
- Joined: Thu Feb 14, 2019 2:54 pm
- FJRModel: 2005 FJR1300 2001 Roadstar
- x 105
- x 167
-
Boston
- Member
- Posts: 166
- Joined: Thu Feb 14, 2019 2:54 pm
- FJRModel: 2005 FJR1300 2001 Roadstar
- x 105
- x 167
Re: wiring schematic 05
Well the plastics are all back on.
What I did was to order all new relays. only 4 of 5 were available.
I checked all wire connectors and I did find that two of the headlight relays spade connection was very loose. It was the 5 pin relay. (the fat wires)
So I made a go no go gauge out of a piece of thin sheet metal. I used it as a spacer and with needle nose pliers squeezed the connection tight again.
For all the connections.
Went out for a test ride (at night) for about an hour and didn't have any issues with the headlights or high beams.
And as Paul Harvey would say,
Now you know the rest of the story.
Edit:
Thanks again raY.
What I did was to order all new relays. only 4 of 5 were available.
I checked all wire connectors and I did find that two of the headlight relays spade connection was very loose. It was the 5 pin relay. (the fat wires)
So I made a go no go gauge out of a piece of thin sheet metal. I used it as a spacer and with needle nose pliers squeezed the connection tight again.
For all the connections.
Went out for a test ride (at night) for about an hour and didn't have any issues with the headlights or high beams.
And as Paul Harvey would say,
Now you know the rest of the story.
Edit:
Thanks again raY.
raYzerman loved this
IBA# 76760