Working on KrZy8 relay arm.
I recall that to clear the upper relay arm bolt the CS bolts had to be cut then reversed with new ones..
??? Can this be done with CS deployed or does it have to be in the UP position?
Pic from when I did Naomi. Are the CS bolts in the pic OEM or already reversed?
Sigh.
CRS strikes again - Relay Arm Removal?
Forum rules
13.B - For tech library threads, same approach as the merchandise threads – all posts will be related to the tech library topic – questions about the topic, posts adding to the topic from a technical perspective, etc. Any posts outside of those will be deleted by forum moderators or admins.
13.B - For tech library threads, same approach as the merchandise threads – all posts will be related to the tech library topic – questions about the topic, posts adding to the topic from a technical perspective, etc. Any posts outside of those will be deleted by forum moderators or admins.
-
- Contributor
- Veteran
- Posts: 1022
- Joined: Wed Jan 23, 2013 12:18 am
- FJRModel: Gen2, Superior 2006, Gen 3 2013 twice as good!
- x 120
- x 1553
- Cav47
- Veteran
- Posts: 4067
- Joined: Sun Feb 16, 2014 7:42 pm
- FJRModel: 2015 ES well appointed FJR
2012 KLX 250S
2022 Honda CRF450RL - Location: Central Illinois.
- x 11318
- x 8159
Re: CRS strikes again - Relay Arm Removal?
Those appear to be in the original position. It looks like the nuts are on the outside which would require the bolts to move to the middle and they will not clear the mechanical parts.
Just my opinion.
Just my opinion.
I often have found myself when I was not looking, nor did that discovery take place where I thought it would!
- Hppants
- Contributor
- I post more than I ride
- Posts: 6971
- Joined: Wed Oct 19, 2016 9:22 pm
- FJRModel: 2021ES
- x 13716
- x 12692
Re: CRS strikes again - Relay Arm Removal?
The CS needs to be retracted.
SkooterG loved this
"I guess it comes down to a simple choice, really. Get busy living. Or get busy dying."
- Andy Dufresne, Shawshank Redemption
- Andy Dufresne, Shawshank Redemption
- SkooterG
- Veteran
- Posts: 615
- Joined: Thu Oct 10, 2019 11:39 pm
- FJRModel: 2004 X 2, 2009 X 2, 2013 X3, 2014, 2017, 2023...... I have issues!
- Location: Skootsdale, AZ
- x 979
- x 1475
Re: CRS strikes again - Relay Arm Removal?
Don't quote me on this but this bolts - with the nuts to the outside is the orientation you want to get them out easy. If orientated the other way the exhaust interferes with removing the bolt.
LOTS of info in this thread: https://www.fjrforum.com/threads/rear-s ... st-1030352
See this post. Your bolts are in the good orientation. https://www.fjrforum.com/threads/rear-s ... st-1038746
LOTS of info in this thread: https://www.fjrforum.com/threads/rear-s ... st-1030352
See this post. Your bolts are in the good orientation. https://www.fjrforum.com/threads/rear-s ... st-1038746
FJRoss loved this
Growing old is mandatory. Growing up is optional.
IBA #327
'04 FJR (X2) -- '09 FJR (X2) -- '13 FJR (X3) -- '14 FJR ES -- '17 FJR ES -- '23 FJR ES -- '14 BMW GSA What can I say? I have issues!
IBA #327
'04 FJR (X2) -- '09 FJR (X2) -- '13 FJR (X3) -- '14 FJR ES -- '17 FJR ES -- '23 FJR ES -- '14 BMW GSA What can I say? I have issues!
-
- Contributor
- Veteran
- Posts: 1022
- Joined: Wed Jan 23, 2013 12:18 am
- FJRModel: Gen2, Superior 2006, Gen 3 2013 twice as good!
- x 120
- x 1553
Re: CRS strikes again - Relay Arm Removal?
Thanks Everyone!
Will do it proper next tire change. More parts ordered. Hey, it's only money, yes?
Will do it proper next tire change. More parts ordered. Hey, it's only money, yes?