This morning I removed tupperware and prepared to flush the brakes and abs unit again…only to discover that last week when I flushed the rear brake, the abs and the clutch that I left the switch on that jumpers the 2 wires in order to flush the abs…raYzerman wrote: ↑Wed Aug 02, 2023 7:00 pm I'd vote cleaning the wheel sensors and lube the holes with dielectric or silicone grease. None on the sensor itself of course.....
Seems to me the Gen3's frequently have issues with ABS lights on or blinking, very sensitive system that way......
My '14 now buddy's has had issues frequently in the last two years. Haven't cured it yet....... he fixes it with an ignition cycle or hard application of the brakes.... but it will come back.
So, I flushed the abs unit again, then I flushed the front brakes.