The 2025 Calendar Voting is now live! Click here to vote!

Regulator Rectifier Connector Replacement

Tech section strictly for the FJR. Everything from oil changes & suspension setup's to removing sheep hair from hard to reach places on the bike so that your wife never finds out.
Post Reply
dcarver
Contributor
Veteran
Posts: 1026
Joined: Wed Jan 23, 2013 12:18 am
FJRModel: Gen2, Superior 2006, Gen 3 2013 twice as good!
x 120
x 1555

Regulator Rectifier Connector Replacement

Post by dcarver »

Note - kind of doubt many will ever replace the RR output connector, but just in case, here's what I learned.
Hope it helps someone in the future.
But I'm too lazy to 'translate' all pic urls to make it work here.. :lol:

"Been noticing a slow RR output voltage droop.
What used to 14.3, 14.4 at 4k rpm with minimal load is now 13.7, 13.8.

Last time I had the RR output connector off, noticed it *easily* came off and on, almost
as if the connector metal fingers had spread open.

So thought I'd start there...

This is a RoadsterCycle harness that goes straight to battery via fuse.
The kit harness comes with connectors installed.
No OEM wiring harness voltage drops using this method."

Pics and full text here.. Feel free to steal, download, molest...
https://candybuttorg.ipage.com/cba/node/1278
0face loved this
User avatar
FJRoss
Veteran
Posts: 2678
Joined: Sat Apr 14, 2018 7:41 pm
FJRModel: 2011 FJR 1300
2017 BMW F700GS
Location: Fredericton NB (Canada)
x 815
x 2401

Re: Regulator Rectifier Connector Replacement

Post by FJRoss »

Nicely done.
dcarver loved this
User avatar
raYzerman
Contributor
I post more than I ride
Posts: 9678
Joined: Mon Mar 18, 2013 10:49 am
FJRModel: 2010 Honda CBF1000FA
Location: Millgrove, Ontario, CA
x 3131
x 11595

Re: Regulator Rectifier Connector Replacement

Post by raYzerman »

Very familiar with the Roadster harness and R/R's from the VFR boys.... wondering how that power and ground to the R/R came loose, it shouldn't if it was snug in the first place.... have you had it unplugged/replugged a few times?
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
dcarver
Contributor
Veteran
Posts: 1026
Joined: Wed Jan 23, 2013 12:18 am
FJRModel: Gen2, Superior 2006, Gen 3 2013 twice as good!
x 120
x 1555

Re: Regulator Rectifier Connector Replacement

Post by dcarver »

raYzerman wrote: Sun Jan 29, 2023 5:00 pm Very familiar with the Roadster harness and R/R's from the VFR boys.... wondering how that power and ground to the R/R came loose, it shouldn't if it was snug in the first place.... have you had it unplugged/replugged a few times?
Yes. Many times actually.
...and, previous connector had a broken 'tang' so would not lock into place. Used Ty-Raps to secure it. And the Roadster wire is heavier gage than OEM, IIRC, so additional mass and fulcrum point?

Then add in 6 miles of washboard road times 5 days a week when working and... well, you know, vibration, unsecured, results predictable. :lol:

Will be curious to see if that really was the issue.
User avatar
raYzerman
Contributor
I post more than I ride
Posts: 9678
Joined: Mon Mar 18, 2013 10:49 am
FJRModel: 2010 Honda CBF1000FA
Location: Millgrove, Ontario, CA
x 3131
x 11595

Re: Regulator Rectifier Connector Replacement

Post by raYzerman »

I'd bet on the frequent unplugging/replugging. Connector is very secure if left plugged in, don't see how vibration could affect it at all.
Roadster's is 12ga. wire, yes heavier than OEM. FJR likely be 14ga. (remembering from my project FJR). VFR is 16 ga. from stator.
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
User avatar
escapefjrtist
Veteran
Posts: 1240
Joined: Sat Jan 19, 2013 12:51 pm
FJRModel: '15 FJR 1300A
Location: Snohomish WA
x 2159
x 1772

Re: Regulator Rectifier Connector Replacement

Post by escapefjrtist »

Good information to have DC, thanks!

~G
IBA34365
'15 FJR-USD-A
'18 Tenere
dcarver
Contributor
Veteran
Posts: 1026
Joined: Wed Jan 23, 2013 12:18 am
FJRModel: Gen2, Superior 2006, Gen 3 2013 twice as good!
x 120
x 1555

Re: Regulator Rectifier Connector Replacement

Post by dcarver »

Happy with results. 200 miles later, coolish days, max 14.5 low 14.1, with 14.1 occurring when 4 LEDS on low beam, heated jacket on high.
0face and Niehart loved this
Post Reply