The 2025 Calendar Voting is now live! Click here to vote!
What did you do to your FJR today?
- raYzerman
- Contributor
- I post more than I ride
- Posts: 9679
- Joined: Mon Mar 18, 2013 10:49 am
- FJRModel: 2010 Honda CBF1000FA
- Location: Millgrove, Ontario, CA
- x 3131
- x 11595
Re: What did you do to your FJR today?
I'd vote about 4 hours, but take your time, coupla beer job......
Try this first.... some reported success..... undo the rear exhaust mounts, loosen the clamp on the left side pipe. Remove right side bolt holding the header to the centerstand. Remove the nut for the front pivot bolt, slide the bolt out against the exhaust..... pry out/up on the right exhaust, the bolt only needs a little bit more clearance to come down and out. If that doesn't work, then proceed to remove centerstand......
Try this first.... some reported success..... undo the rear exhaust mounts, loosen the clamp on the left side pipe. Remove right side bolt holding the header to the centerstand. Remove the nut for the front pivot bolt, slide the bolt out against the exhaust..... pry out/up on the right exhaust, the bolt only needs a little bit more clearance to come down and out. If that doesn't work, then proceed to remove centerstand......
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
Duct tape can't fix stupid, but it can sure muffle the sound.
- Festus
- Contributor
- Veteran
- Posts: 4880
- Joined: Tue Mar 28, 2017 3:40 pm
- FJRModel: 2013 FJR, 2023 KTM 390 Adventure
- x 4067
- x 10945
Re: What did you do to your FJR today?
I rode it for first time since Oct. Nice little 300 mile ride. Would have been longer but the roads were wet everywhere, wind was blowing about 30 mph and gravel in all corners on the super twisty stuff. Decided to come home and live another day rather than risk it. Felt so good to be back in the saddle again.
Blueridgerider, FJRPittsburgh, and wheatonFJR loved this
"That wasn’t as bad as I thought it would be" - 1911
"Stay thirsty, my friends"....... Wouldn't that mean I'm dehydrated all the time?
"Stay thirsty, my friends"....... Wouldn't that mean I'm dehydrated all the time?
- Road Runner
- Veteran
- Posts: 467
- Joined: Mon Sep 16, 2019 9:10 pm
- FJRModel: 2008 FJR Advanced Edition
1987 KLR 650 Thumper - Location: Saratoga, NY. area
- x 1777
- x 855
Re: What did you do to your FJR today?
I used gravity to my advantage. I undo the 2 rear exhaust mounts and the 2 mid exhaust mounts, so the entire exhaust is hanging from header. Then just push down a little on right side exhaust to get out both the center stand bolts and the relay arm bolt. It was really pretty easy. No cutting required. To get the relay bolt out I used a short pry bar to pry down the exhaust. I found this to be better and more controlled then just pushing on it.
Blueridgerider, wheatonFJR, raYzerman and 1 others loved this
"A biker never knows" - Tim Allen
Art
Art
- danh600
- Veteran
- Posts: 4490
- Joined: Tue Mar 25, 2014 3:36 pm
- FJRModel: 2022 FJR1300ES
- Location: Roughedge,NC
- x 5315
- x 9418
Re: What did you do to your FJR today?
I hosted an FJR event this weekend. Didn't get a chance to scrub in the new tires on the FJR. So I took my MT09 to my FJR event.
Blueridgerider, Hppants, extrememarine and 4 others loved this
- FJRPittsburgh
- Contributor
- Veteran
- Posts: 1900
- Joined: Thu Jun 15, 2017 1:10 pm
- FJRModel: 2013 A, 2008 AE has been sold.
- Location: Canonsburg, PA
- x 8632
- x 3643
Re: What did you do to your FJR today?
Took a nice ride on the FJR for the first ride of the year. It ran great , but the clock was an hour fast.
Blueridgerider, Niehart, Bugnatr and 3 others loved this
2013 Yamaha FJR1300A
2013 Honda CRF250L
2018 Yamaha FZ-07
2019 Yamaha Tracer 900 GT
2013 Honda CRF250L
2018 Yamaha FZ-07
2019 Yamaha Tracer 900 GT
- raYzerman
- Contributor
- I post more than I ride
- Posts: 9679
- Joined: Mon Mar 18, 2013 10:49 am
- FJRModel: 2010 Honda CBF1000FA
- Location: Millgrove, Ontario, CA
- x 3131
- x 11595
Re: What did you do to your FJR today?
Does that mean you left the centerstand on??Road Runner wrote: ↑Sun Mar 06, 2022 6:59 pm I used gravity to my advantage. I undo the 2 rear exhaust mounts and the 2 mid exhaust mounts, so the entire exhaust is hanging from header. Then just push down a little on right side exhaust to get out both the center stand bolts and the relay arm bolt. It was really pretty easy. No cutting required. To get the relay bolt out I used a short pry bar to pry down the exhaust. I found this to be better and more controlled then just pushing on it.
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
Duct tape can't fix stupid, but it can sure muffle the sound.
- gixxerjasen
- I post more than I ride
- Posts: 6023
- Joined: Thu Feb 21, 2013 5:50 pm
- FJRModel: 2007 Yamaha FJR1300AE
- Location: DFW
- x 5594
- x 9262
Re: What did you do to your FJR today?
I noticed this the other day, apparently I didn't "Fall back" the bike. But since "Spring ahead" is next week, my laziness shall pay off.FJRPittsburgh wrote: ↑Sun Mar 06, 2022 8:24 pm Took a nice ride on the FJR for the first ride of the year. It ran great , but the clock was an hour fast.
FJRPittsburgh loved this
YouTube Channel | My Blog
Current Bikes:2007 Yamaha FJR1300AE | 2016 KTM 1190 Adventure R | 2001 Suzuki DRZ-400E | 2020 KTM 500 XCF-W
Son's Bike:2019 Honda CRF250L
I'm here to serve as an example of what NOT to do.
Current Bikes:2007 Yamaha FJR1300AE | 2016 KTM 1190 Adventure R | 2001 Suzuki DRZ-400E | 2020 KTM 500 XCF-W
Son's Bike:2019 Honda CRF250L
I'm here to serve as an example of what NOT to do.
- Road Runner
- Veteran
- Posts: 467
- Joined: Mon Sep 16, 2019 9:10 pm
- FJRModel: 2008 FJR Advanced Edition
1987 KLR 650 Thumper - Location: Saratoga, NY. area
- x 1777
- x 855
Re: What did you do to your FJR today?
No. I took it off.raYzerman wrote: ↑Sun Mar 06, 2022 9:17 pmDoes that mean you left the centerstand on??Road Runner wrote: ↑Sun Mar 06, 2022 6:59 pm I used gravity to my advantage. I undo the 2 rear exhaust mounts and the 2 mid exhaust mounts, so the entire exhaust is hanging from header. Then just push down a little on right side exhaust to get out both the center stand bolts and the relay arm bolt. It was really pretty easy. No cutting required. To get the relay bolt out I used a short pry bar to pry down the exhaust. I found this to be better and more controlled then just pushing on it.
raYzerman loved this
"A biker never knows" - Tim Allen
Art
Art
-
- Contributor
- I post more than I ride
- Posts: 20440
- Joined: Wed Jan 16, 2013 6:10 pm
- FJRModel: 2013-Jwilly Special LD Delivery
- Location: Travelers Rest
- x 43773
- x 18952
Re: What did you do to your FJR today?
We ended up having a whale of a day. I had to get back mid-afternoon for a sq dance date with Louanne so we just kinda winged the route. I may may have overshot my arrival time, and I may have been trying to beat the projected gps arrival time at the dance hall on the way back. Stupid gps.wheatonFJR wrote: ↑Sun Mar 06, 2022 7:16 am Not sure where we're goin, but after a Stax breakfast we're headed out for a day ride to exercise the FJRs.
Anyways, we packed it in, even with the short day. Egg and cheese on Texas toast sandwiches at STAX at the meetup spot held us for much of the ride.
We headed up 178/215…then took a westbound Charley’s Creek Rd/281 detour so we could go east to Hot Springs. Ruhroh.
We hightailed to 212/208/?? Past Hot Springs to Erwin, TN. I knew by now I was going to be late to the dance. Sent a text to wifey that sorry, I was gonna be 45 minutes late to a 2 hr dance because of a detour. She asked if “detour” was code for accident. I said no! She later asked if detour was code for a ticket(s). Again, I said No!
I gulped down my apple and cheese and chocolate chip cookie and coffee drink and got out of there. Now I was leading…ruhroh. Oh well, I was not a very civil rider as the gps now had me 1hr late even before we left. So, 167 to 226a to 80 to Marion. I made it to The dance hall with 45mins left of a 2hr dance. Stupid gps.
I probably wasn’t a very good riding partner, but oh well… who knows, maybe that’s always the case.
Well, I had fun, roads were awesome, weather was great, and I had fun dancing with Louanne as well.
Last edited by wheatonFJR on Mon Mar 07, 2022 10:09 am, edited 1 time in total.
Blueridgerider, Road Runner, and Niehart loved this
boatanchor, 3rd class.
- gixxerjasen
- I post more than I ride
- Posts: 6023
- Joined: Thu Feb 21, 2013 5:50 pm
- FJRModel: 2007 Yamaha FJR1300AE
- Location: DFW
- x 5594
- x 9262
Re: What did you do to your FJR today?
Sounds like you were a pretty terrible dance partner too.
wheatonFJR loved this
YouTube Channel | My Blog
Current Bikes:2007 Yamaha FJR1300AE | 2016 KTM 1190 Adventure R | 2001 Suzuki DRZ-400E | 2020 KTM 500 XCF-W
Son's Bike:2019 Honda CRF250L
I'm here to serve as an example of what NOT to do.
Current Bikes:2007 Yamaha FJR1300AE | 2016 KTM 1190 Adventure R | 2001 Suzuki DRZ-400E | 2020 KTM 500 XCF-W
Son's Bike:2019 Honda CRF250L
I'm here to serve as an example of what NOT to do.
-
- Veteran
- Posts: 578
- Joined: Mon Sep 01, 2014 8:31 am
- FJRModel: 2018 FJR-1300ES, 2010 Ural Gear Up, 2003
Yamaha FJR-1300, 2001 Kawasaki KLR-650 (Gone to a new home), 1997 Suzuki TL-1000s (Gone but not forgotten), 1976 Honda 400 Four, 1968 Honda C-50 Step-thru - Location: Nova Scotia, Canada
- x 47
- x 543
Re: What did you do to your FJR today?
Road Runner
Sounds like you only left the header bolts connected and just flexed the entire exhaust low enough for the bolts to clear. Am I reading this correctly?
Canadian FJR
Sounds like you only left the header bolts connected and just flexed the entire exhaust low enough for the bolts to clear. Am I reading this correctly?
Canadian FJR
Road Runner loved this
- Road Runner
- Veteran
- Posts: 467
- Joined: Mon Sep 16, 2019 9:10 pm
- FJRModel: 2008 FJR Advanced Edition
1987 KLR 650 Thumper - Location: Saratoga, NY. area
- x 1777
- x 855
Re: What did you do to your FJR today?
Yes, that is what I did. I took out the center stand and relay arm. It worked fine and was really easy. I used a small pry bar/big screwdriver to pry between the exhaust and frame/engine, so it was easy to go only as far as needed and then let it go right back.Canadian FJR wrote: ↑Mon Mar 07, 2022 10:46 pm Road Runner
Sounds like you only left the header bolts connected and just flexed the entire exhaust low enough for the bolts to clear. Am I reading this correctly?
Canadian FJR
When I did my 07 I cut the relay arm bolt, because I was afraid to flex the exhaust that far. Now I'm not afraid, because flexing the exhaust worked fine.
"A biker never knows" - Tim Allen
Art
Art
- danh600
- Veteran
- Posts: 4490
- Joined: Tue Mar 25, 2014 3:36 pm
- FJRModel: 2022 FJR1300ES
- Location: Roughedge,NC
- x 5315
- x 9418
Re: What did you do to your FJR today?
My GPS changes by itself. So the bike never gets changed.gixxerjasen wrote: ↑Sun Mar 06, 2022 9:54 pmI noticed this the other day, apparently I didn't "Fall back" the bike. But since "Spring ahead" is next week, my laziness shall pay off.FJRPittsburgh wrote: ↑Sun Mar 06, 2022 8:24 pm Took a nice ride on the FJR for the first ride of the year. It ran great , but the clock was an hour fast.
FJRPittsburgh loved this
- gixxerjasen
- I post more than I ride
- Posts: 6023
- Joined: Thu Feb 21, 2013 5:50 pm
- FJRModel: 2007 Yamaha FJR1300AE
- Location: DFW
- x 5594
- x 9262
Re: What did you do to your FJR today?
Probably my one and only complaint with the Garmin Zumo XT is that Time of day takes up a data field instead of being displayed on the screen during navigation like my old 220 did.danh600 wrote: ↑Tue Mar 08, 2022 8:22 amMy GPS changes by itself. So the bike never gets changed.gixxerjasen wrote: ↑Sun Mar 06, 2022 9:54 pmI noticed this the other day, apparently I didn't "Fall back" the bike. But since "Spring ahead" is next week, my laziness shall pay off.FJRPittsburgh wrote: ↑Sun Mar 06, 2022 8:24 pm Took a nice ride on the FJR for the first ride of the year. It ran great , but the clock was an hour fast.
YouTube Channel | My Blog
Current Bikes:2007 Yamaha FJR1300AE | 2016 KTM 1190 Adventure R | 2001 Suzuki DRZ-400E | 2020 KTM 500 XCF-W
Son's Bike:2019 Honda CRF250L
I'm here to serve as an example of what NOT to do.
Current Bikes:2007 Yamaha FJR1300AE | 2016 KTM 1190 Adventure R | 2001 Suzuki DRZ-400E | 2020 KTM 500 XCF-W
Son's Bike:2019 Honda CRF250L
I'm here to serve as an example of what NOT to do.
- bill lumberg
- Contributor
- Veteran
- Posts: 2633
- Joined: Tue Jun 30, 2015 1:03 pm
- FJRModel: 2018ES/2022ES
- x 4063
- x 4506
- Contact:
Re: What did you do to your FJR today?
Rode it to the office. Ordered another rear tire for it (PR4GT, $209). I’m not sure how much tread will be left in the center of this one come TOH 1 April.
Blueridgerider and wheatonFJR loved this
#boatanchorsmatter
2022ES
2022ES
-
- Contributor
- I post more than I ride
- Posts: 20440
- Joined: Wed Jan 16, 2013 6:10 pm
- FJRModel: 2013-Jwilly Special LD Delivery
- Location: Travelers Rest
- x 43773
- x 18952
Re: What did you do to your FJR today?
Ordered a Dual SeNA SMH10 yesterday about 6pm. Package arrived at our front door today, about 1:30pm. Free shipping.
Blueridgerider, El Toro Joe, Spininprop and 2 others loved this
boatanchor, 3rd class.
- extrememarine
- HMFIC
- I post more than I ride
- Posts: 6877
- Joined: Sun Jan 13, 2013 12:17 pm
- FJRModel: 2009 FJR
- Location: SE Michigan
- x 2087
- x 13160
- Contact:
Re: What did you do to your FJR today?
Rode it - Sunny and 60 degrees Sunday morning. Those conditions - in Michigan - in early March - could not be ignored. My spring shake down run takes me north for short stretch of slab, then side rodes along the St Clair River to the bottom of Lake Huron and the Blue Water Bridge.
Snapped a few pictures; this one is for my canukistanian friends - hope to see you guys this year (subtle reminder for Bungie - bring Line next time)!
Snapped a few pictures; this one is for my canukistanian friends - hope to see you guys this year (subtle reminder for Bungie - bring Line next time)!
FJRPittsburgh, Blueridgerider, wheatonFJR and 4 others loved this
Ride There!
-Wayne aka asphalt surfer...
IBA#60836
#Peteyismyhero & #JWillywashere
-Wayne aka asphalt surfer...
IBA#60836
#Peteyismyhero & #JWillywashere
-
- Contributor
- I post more than I ride
- Posts: 20440
- Joined: Wed Jan 16, 2013 6:10 pm
- FJRModel: 2013-Jwilly Special LD Delivery
- Location: Travelers Rest
- x 43773
- x 18952
-
- Veteran
- Posts: 3075
- Joined: Sat Mar 09, 2013 1:16 am
- FJRModel: 2014 SuperTanker1200. 2018 DCT Hippo,
2007 KLR650... the Goldwing of thumpers - Location: Northwest Peardale, Ca
- x 6163
- x 6032
Re: What did you do to your FJR today?
Ordered from whom may I ask?wheatonFJR wrote: ↑Tue Mar 08, 2022 4:00 pm Ordered a Dual SeNA SMH10 yesterday about 6pm. Package arrived at our front door today, about 1:30pm. Free shipping.
It's too deep, this is a bike not a canoe.
-
- Contributor
- I post more than I ride
- Posts: 20440
- Joined: Wed Jan 16, 2013 6:10 pm
- FJRModel: 2013-Jwilly Special LD Delivery
- Location: Travelers Rest
- x 43773
- x 18952
Re: What did you do to your FJR today?
Amazon.Bugnatr wrote: ↑Tue Mar 08, 2022 11:47 pmOrdered from whom may I ask?wheatonFJR wrote: ↑Tue Mar 08, 2022 4:00 pm Ordered a Dual SeNA SMH10 yesterday about 6pm. Package arrived at our front door today, about 1:30pm. Free shipping.
boatanchor, 3rd class.