The 2025 Calendar is now available for purchase! Click here for purchase links!
Gen 1 and Gen 2
-
- Contributor
- I post more than I ride
- Posts: 20501
- Joined: Wed Jan 16, 2013 6:10 pm
- FJRModel: 2013-Jwilly Special LD Delivery
- Location: Travelers Rest
- x 44008
- x 19042
Re: Gen 1 and Gen 2
2006...Just get the electrical issue checked on that so you don’t get stranded somewhere.
Griff rode his 03 for at least 130k miles, so they go for long time.
Griff rode his 03 for at least 130k miles, so they go for long time.
boatanchor, 3rd class.
-
- Squid
- Posts: 28
- Joined: Fri Jan 15, 2021 6:23 pm
- FJRModel: 2003
- x 1
- x 22
Re: Gen 1 and Gen 2
Thank you for the links and input. I will change if right away of the bike has not been done already. Many thanks from a newbie to FJR-dom.
-
- Contributor
- I post more than I ride
- Posts: 20501
- Joined: Wed Jan 16, 2013 6:10 pm
- FJRModel: 2013-Jwilly Special LD Delivery
- Location: Travelers Rest
- x 44008
- x 19042
Re: Gen 1 and Gen 2
Welcome to the FJR world, don’t make yourself scarce...and remember to help others along the way. That’s how we do it here...no secret handshakes, no hoops to jump through, just the initial joshing around sometimes unless yer a dik...then the joshing becomes a hazing.tim ferrell wrote: ↑Mon Jan 18, 2021 1:19 pm Thank you for the links and input. I will change if right away of the bike has not been done already. Many thanks from a newbie to FJR-dom.
HotRodZilla loved this
boatanchor, 3rd class.
- ionbeam
- Contributor
- Veteran
- Posts: 2988
- Joined: Mon Feb 04, 2013 7:14 am
- FJRModel: '15ES in Low-Viz Assfault Gray
- Location: Sandown, NH
- x 534
- x 5425
Re: Gen 1 and Gen 2
So, the FJR ends up being a 2003? If so, there is a persistent rumor that the '03 had 'introductory HP' making it quicker than consequent years. This was a real thing that motorcycle brands used to do, and it made for some good magazine reviews.
wheatonFJR loved this
-
- Veteran
- Posts: 1433
- Joined: Thu Mar 14, 2013 7:43 pm
- FJRModel: 06fjr
- Location: Fredericksburg Virginia
- x 293
- x 1633
-
- Contributor
- I post more than I ride
- Posts: 20501
- Joined: Wed Jan 16, 2013 6:10 pm
- FJRModel: 2013-Jwilly Special LD Delivery
- Location: Travelers Rest
- x 44008
- x 19042
-
- Squid
- Posts: 28
- Joined: Fri Jan 15, 2021 6:23 pm
- FJRModel: 2003
- x 1
- x 22
Re: Gen 1 and Gen 2
I have a picture of the CCT on the bike. It has a dot but there is no pigment to it in the picture, although it is in the right place. I can't seem to get it to post, or I would be asking if you all thought it looked like a replacement to the original.
BTW, no worries about helping when I can. I have had to learn everything from scratch so I know how valuable (and time saving) experienced input can be.
Thanks to all who replied.
BTW, no worries about helping when I can. I have had to learn everything from scratch so I know how valuable (and time saving) experienced input can be.
Thanks to all who replied.
- FJRoss
- Veteran
- Posts: 2694
- Joined: Sat Apr 14, 2018 7:41 pm
- FJRModel: 2011 FJR 1300
2017 BMW F700GS - Location: Fredericton NB (Canada)
- x 821
- x 2416
Re: Gen 1 and Gen 2
This is what it should look like. (Blue (or green) dot on the side of the newer version.
wheatonFJR loved this
-
- Squid
- Posts: 28
- Joined: Fri Jan 15, 2021 6:23 pm
- FJRModel: 2003
- x 1
- x 22
Re: Gen 1 and Gen 2
Thank you! Well, the dot is in exactly the right place. It's just a little frayed at the edges and has lost its pigment, apparently.
HotRodZilla and wheatonFJR loved this
-
- Squid
- Posts: 28
- Joined: Fri Jan 15, 2021 6:23 pm
- FJRModel: 2003
- x 1
- x 22
- FJRoss
- Veteran
- Posts: 2694
- Joined: Sat Apr 14, 2018 7:41 pm
- FJRModel: 2011 FJR 1300
2017 BMW F700GS - Location: Fredericton NB (Canada)
- x 821
- x 2416
Re: Gen 1 and Gen 2
I can see the photo when I click your link. I don't know for sure if this is a solid identification of the "dot" new version or not. I would carefully listen for noise and plan to replace it when you do the first valve clearance check (or earlier). Around $108 from on-line parts places plus $13 for the timing case cover gasket (might not be needed) and a couple of bucks for the CCT gasket.tim ferrell wrote: ↑Tue Jan 19, 2021 1:04 pm https://documentcloud.adobe.com/link/re ... 450a24df35
I don't know if this will work.....
You can use https://postimages.org/ to post photos directly. Don't need an account and service is free. Wouldn't guarantee they will stay forever but suitable for this application.
Last edited by FJRoss on Tue Jan 19, 2021 1:42 pm, edited 1 time in total.
-
- Squid
- Posts: 28
- Joined: Fri Jan 15, 2021 6:23 pm
- FJRModel: 2003
- x 1
- x 22
- raYzerman
- Contributor
- I post more than I ride
- Posts: 9724
- Joined: Mon Mar 18, 2013 10:49 am
- FJRModel: 2010 Honda CBF1000FA
- Location: Millgrove, Ontario, CA
- x 3158
- x 11691
Re: Gen 1 and Gen 2
Um... no. A couple of questions were asked about ebay used ones with a black dot. Steer clear, grasshopper... I have never seen a blue or green one change colour or lose its pigment... if in doubt, just get a new one for peace of mind.
wheatonFJR loved this
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
Duct tape can't fix stupid, but it can sure muffle the sound.
-
- Squid
- Posts: 28
- Joined: Fri Jan 15, 2021 6:23 pm
- FJRModel: 2003
- x 1
- x 22
-
- Squid
- Posts: 28
- Joined: Fri Jan 15, 2021 6:23 pm
- FJRModel: 2003
- x 1
- x 22
Re: Gen 1 and Gen 2
Received CCT and two gaskets today (Sun.!) Glad I opened it - the greeen dot was almost worn off from chafe inside the box (doh!). Now I think I have the correct dot.
- FJRoss
- Veteran
- Posts: 2694
- Joined: Sat Apr 14, 2018 7:41 pm
- FJRModel: 2011 FJR 1300
2017 BMW F700GS - Location: Fredericton NB (Canada)
- x 821
- x 2416
Re: Gen 1 and Gen 2
Two gaskets?
The one for the CCT plus the one for the timing cover?
I would definitely replace the CCT one - just because it is a major pain to get to it.
The timing cover can usually be removed without damaging the gasket but you need to have one around just in case.
Watch for the dowel pins when you remove the cover and make sure you don't pinch wires (O2 sensor) in the cover when you replace it.
The one for the CCT plus the one for the timing cover?
I would definitely replace the CCT one - just because it is a major pain to get to it.
The timing cover can usually be removed without damaging the gasket but you need to have one around just in case.
Watch for the dowel pins when you remove the cover and make sure you don't pinch wires (O2 sensor) in the cover when you replace it.
Last edited by FJRoss on Sun Jan 31, 2021 8:17 pm, edited 1 time in total.
-
- Squid
- Posts: 28
- Joined: Fri Jan 15, 2021 6:23 pm
- FJRModel: 2003
- x 1
- x 22
Re: Gen 1 and Gen 2
10-4. Two gaskets just in case. If I don't need both, it is no big deal. Won't be held up if the other one is needed. Will scope the pins and wires. Many thanks.
-t-
-t-
- tominca
- Veteran
- Posts: 576
- Joined: Tue Mar 12, 2013 9:17 pm
- FJRModel: 2005 ABS
- Location: East of Tampa
- x 106
- x 430
Re: Gen 1 and Gen 2
I have the 2005 ABS FJR1300A. It pains me these forums don't give this bike the respect the fastest color and superior Gen I deserves, but I did the heat fix, blue-dot CCT, forks and main suspension upgrades, Rick Meyer custom seat, Clearwater Krista LED lights, Cyclops 8300 lm LEDs 88-degree valve stems, throttle lock, heated gear, electrical upgrades and kept after routine maintenance. It has given me many years and miles of trouble-free, high performance riding with multiple transcontinental trips, gatherings and rallies and day rides. It never stranded me, and I wouldn't hesitate to take it coast to coast any time. For a 15 year old bike, it seems fresh in style and performance, and still gets compliments. It's faster than my angles can fly, and I have to keep remembering they fly slower these days. It's not the latest, but I'd argue it's the greatest, and probably the last bike I'll ever own.
FredandJeannesRacer and wheatonFJR loved this
It's a good day to ride
-
- Contributor
- I post more than I ride
- Posts: 20501
- Joined: Wed Jan 16, 2013 6:10 pm
- FJRModel: 2013-Jwilly Special LD Delivery
- Location: Travelers Rest
- x 44008
- x 19042