The 2025 Calendar Voting is now live! Click here to vote!

Rear wheel bearings

Talk about issues and questions specific to the FJR here.
User avatar
fencer
Veteran
Posts: 939
Joined: Sat Jan 19, 2013 12:07 am
FJRModel: 2006 *SOLD now 2018
x 215
x 274

Rear wheel bearings

Post by fencer »

Are they sealed or need packing. My pumpkin side is loosing grease
Just here to show my ass --------->>>>>>>>
User avatar
raYzerman
Contributor
I post more than I ride
Posts: 9678
Joined: Mon Mar 18, 2013 10:49 am
FJRModel: 2010 Honda CBF1000FA
Location: Millgrove, Ontario, CA
x 3131
x 11592

Re: Rear wheel bearings

Post by raYzerman »

They are sealed. Likely grease is excess from last spline lube, not bearings. Wipe off and ride.
HotRodZilla and Bounce loved this
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
User avatar
FJRoss
Veteran
Posts: 2678
Joined: Sat Apr 14, 2018 7:41 pm
FJRModel: 2011 FJR 1300
2017 BMW F700GS
Location: Fredericton NB (Canada)
x 815
x 2401

Re: Rear wheel bearings

Post by FJRoss »

raYzerman wrote: Thu Sep 17, 2020 8:33 am They are sealed. Likely grease is excess from last spline lube, not bearings. Wipe off and ride.
Agree with Ray's response but are you sure it is grease? There is a possibility of a seal going in the pumpkin and the residue is actually lube from the final drive. What is the consistency and where are you seeing it? (Can also happen if the wheel is rotated while filling the final drive - end out with an overfill which leads to leakage.)
SkooterG and HotRodZilla loved this
User avatar
Cav47
Veteran
Posts: 4088
Joined: Sun Feb 16, 2014 7:42 pm
FJRModel: 2015 ES well appointed FJR
2012 KLX 250S
2022 Honda CRF450RL
Location: Central Illinois.
x 11418
x 8222

Re: Rear wheel bearings

Post by Cav47 »

FJRoss wrote: Thu Sep 17, 2020 8:41 am
raYzerman wrote: Thu Sep 17, 2020 8:33 am They are sealed. Likely grease is excess from last spline lube, not bearings. Wipe off and ride.
Agree with Ray's response but are you sure it is grease? There is a possibility of a seal going in the pumpkin and the residue is actually lube from the final drive. What is the consistency and where are you seeing it? (Can also happen if the wheel is rotated while filling the final drive - end out with an overfill which leads to leakage.)
Message deleted because it was way way way inappropriate. Funny none the less, but even I know it might have offended someone. If you want to know what I was thinking, just imagine what Bust was thinking.
Bust, HotRodZilla, and FJRoss loved this
I often have found myself when I was not looking, nor did that discovery take place where I thought it would!

Image
wheatonFJR
Contributor
I post more than I ride
Posts: 20438
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013-Jwilly Special LD Delivery
Location: Travelers Rest
x 43768
x 18948

Re: Rear wheel bearings

Post by wheatonFJR »

Wipe off excess, remove fill bolt and visually inspect level. Should satisfy your curiosity and cure your angst...or at least be enlightening.
HotRodZilla and Bounce loved this
boatanchor, 3rd class.
User avatar
gixxerjasen
I post more than I ride
Posts: 6023
Joined: Thu Feb 21, 2013 5:50 pm
FJRModel: 2007 Yamaha FJR1300AE
Location: DFW
x 5594
x 9260

Re: Rear wheel bearings

Post by gixxerjasen »

Cav47 wrote: Thu Sep 17, 2020 9:06 am
FJRoss wrote: Thu Sep 17, 2020 8:41 am
raYzerman wrote: Thu Sep 17, 2020 8:33 am They are sealed. Likely grease is excess from last spline lube, not bearings. Wipe off and ride.
Agree with Ray's response but are you sure it is grease? There is a possibility of a seal going in the pumpkin and the residue is actually lube from the final drive. What is the consistency and where are you seeing it? (Can also happen if the wheel is rotated while filling the final drive - end out with an overfill which leads to leakage.)
Message deleted because it was way way way inappropriate. Funny none the less, but even I know it might have offended someone. If you want to know what I was thinking, just imagine what Bust was thinking.
Inappropriate? Offended? On THIS board? It must have been WAY across the line. :lol:
HotRodZilla, Cav47, and wheatonFJR loved this
YouTube Channel | My Blog
Current Bikes:2007 Yamaha FJR1300AE | 2016 KTM 1190 Adventure R | 2001 Suzuki DRZ-400E | 2020 KTM 500 XCF-W
Son's Bike:2019 Honda CRF250L

I'm here to serve as an example of what NOT to do.
User avatar
raYzerman
Contributor
I post more than I ride
Posts: 9678
Joined: Mon Mar 18, 2013 10:49 am
FJRModel: 2010 Honda CBF1000FA
Location: Millgrove, Ontario, CA
x 3131
x 11592

Re: Rear wheel bearings

Post by raYzerman »

If the splooge is all over the final drive, then oil likely sprayed out the vent (if overfilled). Around the wheel hub would be spline grease from the inside.
The real way of course is to check fluid level (likely normal now) and pull the rear wheel and wipe off some excess. You can peek at the nice orange wheel bearing seal inside the hub and it should be dry (I'm betting on it, never saw a wheel bearing seal come out of place).. put it back together and ride more, worry less.
HotRodZilla loved this
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
User avatar
SkooterG
Veteran
Posts: 649
Joined: Thu Oct 10, 2019 11:39 pm
FJRModel: 2004 X 2, 2009 X 2, 2013 X3, 2014, 2017, 2023...... I have issues!
Location: Skootsdale, AZ
x 1027
x 1514

Re: Rear wheel bearings

Post by SkooterG »

raYzerman wrote: Thu Sep 17, 2020 12:17 pm If the splooge is all over the final drive, then oil likely sprayed out the vent (if overfilled). Around the wheel hub would be spline grease from the inside.
The real way of course is to check fluid level (likely normal now) and pull the rear wheel and wipe off some excess. You can peek at the nice orange wheel bearing seal inside the hub and it should be dry (I'm betting on it, never saw a wheel bearing seal come out of place).. put it back together and ride more, worry less.
While all that is possible.....

I've said it before and I'll say it again. In umpteen gazillion miles on several FJRs I have had many occurrences of splooge on the wheels and final drive. The source of said splooge has *never* been from the FD vent nor grease from the splines. It has *always* been from FD oil weeping past the driveshaft seal and coming out the weep hole on the bottom of the swingarm. And checking the FD fluid level won't tell you squat. A 'little' leaked FD oil goes a 'long' way into making a big mess.

Cav - get your mind out of the gutter. I'm talking FD oil splooge!
Cav47, fencer, HotRodZilla and 3 others loved this
Growing old is mandatory. Growing up is optional.

IBA #327

'04 FJR (X2) -- '09 FJR (X2) -- '13 FJR (X3) -- '14 FJR ES -- '17 FJR ES -- '23 FJR ES -- '14 BMW GSA What can I say? I have issues!
User avatar
SkooterG
Veteran
Posts: 649
Joined: Thu Oct 10, 2019 11:39 pm
FJRModel: 2004 X 2, 2009 X 2, 2013 X3, 2014, 2017, 2023...... I have issues!
Location: Skootsdale, AZ
x 1027
x 1514

Re: Rear wheel bearings

Post by SkooterG »

I found some photos of two prior occurrences of FD oil weepage and resulting wheel splooge. These are much worse than the *usual* times it happens where it is only a little bit. No notable drop in oil level. Like I said, a little spilt FD milk makes a big mess!


Image


Image



This next one I had the seal on the driveshaft replaced not too long after this occurrence. It never weeped this bad again, but I still would occasionally have *small* ones.


Image


Image


Image
fencer, HotRodZilla, PhilJet09 and 1 others loved this
Growing old is mandatory. Growing up is optional.

IBA #327

'04 FJR (X2) -- '09 FJR (X2) -- '13 FJR (X3) -- '14 FJR ES -- '17 FJR ES -- '23 FJR ES -- '14 BMW GSA What can I say? I have issues!
User avatar
PhilJet09
Contributor
Veteran
Posts: 718
Joined: Mon Mar 24, 2014 8:49 pm
FJRModel: 2009 FJR1300A
Location: NW Ohio
x 3154
x 1342

Re: Rear wheel bearings

Post by PhilJet09 »

^^^^Thats been my experience as well. Changing out the seal stopped it from doing that, but it never leaked enough oil to appear low in the filler port, despite the huge mess.
RIP Beemerdons, Petey, JWilly, 1911

Calm is a skill.
“Courage is the first virtue.” Andrew Klavan
“Because “someday” is not a day of the week…” Wayne
User avatar
HotRodZilla
Veteran
Posts: 4452
Joined: Sat Jan 19, 2013 1:09 am
FJRModel: 07 FJR-A
Location: Albuquerque, NM
x 13000
x 6299

Re: Rear wheel bearings

Post by HotRodZilla »

If anyone is an expert on leaking splooge, it is Skooter.
bungie4, Bust, Auburn and 4 others loved this
User avatar
fencer
Veteran
Posts: 939
Joined: Sat Jan 19, 2013 12:07 am
FJRModel: 2006 *SOLD now 2018
x 215
x 274

Re: Rear wheel bearings

Post by fencer »

SkooterG wrote: Thu Sep 17, 2020 5:45 pm I found some photos of two prior occurrences of FD oil weepage and resulting wheel splooge. These are much worse than the *usual* times it happens where it is only a little bit. No notable drop in oil level. Like I said, a little spilt FD milk makes a mess

Scooter, looks about right.

Which part did you replace?
https://www.partzilla.com/catalog/yamah ... rive-shaft
Just here to show my ass --------->>>>>>>>
User avatar
SkooterG
Veteran
Posts: 649
Joined: Thu Oct 10, 2019 11:39 pm
FJRModel: 2004 X 2, 2009 X 2, 2013 X3, 2014, 2017, 2023...... I have issues!
Location: Skootsdale, AZ
x 1027
x 1514

Re: Rear wheel bearings

Post by SkooterG »

fencer wrote: Fri Sep 18, 2020 12:26 am
SkooterG wrote: Thu Sep 17, 2020 5:45 pm I found some photos of two prior occurrences of FD oil weepage and resulting wheel splooge. These are much worse than the *usual* times it happens where it is only a little bit. No notable drop in oil level. Like I said, a little spilt FD milk makes a mess

Scooter, looks about right.

Which part did you replace?
https://www.partzilla.com/catalog/yamah ... rive-shaft
#12 - Oil Seal.

I did not have the tools or knowledge to do it myself. So I removed the FD and took it to the only dealer I trust. I believe he may have disassembled and replaced other seals/O-rings when he did it. It was so long ago I can't remember all the details. But #12 is the offender. The oil seal that keeps the oil in the FD and from coming through where the driveshaft enters the FD.
Bust and fencer loved this
Growing old is mandatory. Growing up is optional.

IBA #327

'04 FJR (X2) -- '09 FJR (X2) -- '13 FJR (X3) -- '14 FJR ES -- '17 FJR ES -- '23 FJR ES -- '14 BMW GSA What can I say? I have issues!
rbentnail
Contributor
Veteran
Posts: 1180
Joined: Sun Jan 20, 2013 4:54 am
FJRModel: 2007A, 2013A
Location: Asheboro, NC
x 425
x 1192

Re: Rear wheel bearings

Post by rbentnail »

It was my #12 oil seal that got replaced as well, in 2009 or '10. No problems since.
User avatar
raYzerman
Contributor
I post more than I ride
Posts: 9678
Joined: Mon Mar 18, 2013 10:49 am
FJRModel: 2010 Honda CBF1000FA
Location: Millgrove, Ontario, CA
x 3131
x 11592

Re: Rear wheel bearings

Post by raYzerman »

I don't get it.. you asked about wheel bearings which would imply some minor grease/oil splatter. Now you post pics of an obvious seal issue. If that's your actual condition, you knew the answers already. What are you trolling for?
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
User avatar
Bounce
Veteran
Posts: 3949
Joined: Sat Jan 19, 2013 10:19 am
FJRModel: 2003
x 7346
x 3487

Re: Rear wheel bearings

Post by Bounce »

I've lost track of who's who in all the personal pronouns of "you" and "he" and "they", etc.

Anyone have a playbill?
Bust and fencer loved this
User avatar
HotRodZilla
Veteran
Posts: 4452
Joined: Sat Jan 19, 2013 1:09 am
FJRModel: 07 FJR-A
Location: Albuquerque, NM
x 13000
x 6299

Re: Rear wheel bearings

Post by HotRodZilla »

raYzerman wrote: Fri Sep 18, 2020 9:15 am I don't get it.. you asked about wheel bearings which would imply some minor grease/oil splatter. Now you post pics of an obvious seal issue. If that's your actual condition, you knew the answers already. What are you trolling for?
Put down the alcohol. Is the smoke getting to you? Fencer didn't post any pictures. Skooter posted pictures and Fencer agreed that those pictures look like the issue he's having. Don't get me wrong, Fencer is a troll, but a different kind than the one you are referencing.
Hppants, Bust, SkooterG and 2 others loved this
User avatar
fencer
Veteran
Posts: 939
Joined: Sat Jan 19, 2013 12:07 am
FJRModel: 2006 *SOLD now 2018
x 215
x 274

Re: Rear wheel bearings

Post by fencer »

HotRodZilla wrote: Fri Sep 18, 2020 2:02 pm, Fencer is a troll, but a different kind than the one you are referencing.
I'm only a troll when the sun doesn't make me a statue
HotRodZilla, Bust, and wheatonFJR loved this
Just here to show my ass --------->>>>>>>>
User avatar
Bust
Veteran
Posts: 2227
Joined: Sat Jan 19, 2013 12:08 am
FJRModel: 68' Schwinn Stingray
Location: Owosso Mi
x 6167
x 1767
Contact:

Re: Rear wheel bearings

Post by Bust »

SkooterG wrote: Thu Sep 17, 2020 5:45 pm I found some photos of two prior occurrences of FD oil weepage and resulting wheel splooge. These are much worse than the *usual* times it happens where it is only a little bit. No notable drop in oil level. Like I said, a little spilt FD milk makes a big mess!


Image

Image
Looks like vaginal discharge to me.... But what do I know?
wheatonFJR and HotRodZilla loved this
You ever see a grown man naked Billy?
User avatar
HotRodZilla
Veteran
Posts: 4452
Joined: Sat Jan 19, 2013 1:09 am
FJRModel: 07 FJR-A
Location: Albuquerque, NM
x 13000
x 6299

Re: Rear wheel bearings

Post by HotRodZilla »

Bust wrote: Fri Sep 18, 2020 10:35 pm
SkooterG wrote: Thu Sep 17, 2020 5:45 pm I found some photos of two prior occurrences of FD oil weepage and resulting wheel splooge. These are much worse than the *usual* times it happens where it is only a little bit. No notable drop in oil level. Like I said, a little spilt FD milk makes a big mess!


Image

Image
Looks like vaginal discharge to me.... But what do I know?
My first question has to be, how do you know anything about vaginas?
fencer, Pterodactyl, bigjohnsd and 3 others loved this
Post Reply