The 2021 Calendar Contest voting is live! Click here to cast your vote

Tire Changing: DIY tire machines, gadgets, and apparatus

Tech section strictly for the FJR. Everything from oil changes & suspension setup's to removing sheep hair from hard to reach places on the bike so that your wife never finds out.
User avatar
wheatonFJR
Contributor
I post more than I ride
Posts: 12846
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013
Location: Travelers Rest
x 20198
x 8819

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by wheatonFJR » Thu Jul 12, 2018 11:14 am

bungie4 wrote:
Thu Jul 12, 2018 10:19 am
...(How sad is it that I need to be specific on this forum).
Yes, it is sad they we have gained that perception of you...so thanks for clarifying your tastes.
blind squirrel loved this
“There’s no better therapy than a ride.” -petey

User avatar
Harald
Member
Posts: 240
Joined: Tue Jan 22, 2013 12:12 pm
FJRModel: 2007 FJR1300A
Location: Bonney Lake, WA
x 265
x 131

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by Harald » Thu Jul 12, 2018 2:42 pm

I used to wrestle with wheels on the floor to change tires, but upgraded about 10 years ago. I enjoy making my own tools and put together a bead breaker/tire changing setup along with a balance stand. Cost me about $10 to buy a few things that I didn't already have laying around to repurpose. I lost picture hosting last year and need to find a new host. I hear Facebook can be used to host pictures and I plan on investigating this so I can write up a proper report for anyone looking for the low cost option. :lol:

One thing I did spend money on was a tire install/removal bar from http://www.no-scufftiretool.com/ . Works much easier than spoons.

Speaking of air compressors, I just upgraded my old ear splitting compressor with a SUPER quiet one from Hulk Power. No more ear muffs required when I'm in the shop! :) https://www.summitracing.com/parts/emx- ... /overview/

Powerman
Veteran
Posts: 747
Joined: Thu Mar 14, 2013 7:43 pm
FJRModel: 06fjr
x 4
x 498

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by Powerman » Sat Jul 14, 2018 8:45 pm

I should have made a video of the tire removal from hell!

Broke the bolt off the end of the mojo lever. Not going to kick my ass.
Heated the tire with with the heat gun, tried a big ass pry bar with a piece of plastic on the rim, denied.
Next tried a Sawzall with a metal blade bouncing off the bead. Got out the grinder with a little cutting wheel.
Now were getting somewhere, until the cutting wheel hit the metal bead wires and started shooting out sparks.
The wife got scared and dropped the bar holding the tire off the rim, put a gouge in the rim.
A little epoxy and sanding, a little paint, at least it was off. All the rest of the tires have since come off with little drama.
PhilJet09 and Full House loved this

User avatar
bungie4
Veteran
Posts: 4844
Joined: Sat Jan 19, 2013 7:43 pm
FJRModel: 2013 FJR 1300
x 1951
x 3024

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by bungie4 » Sat Jul 14, 2018 9:26 pm

Powerman wrote:
Sat Jul 14, 2018 8:45 pm
I should have made a video of the tire removal from hell!
Lemme guess T30?
raYzerman loved this
WWPD.
#SnowMexican
Note: The FJR1300ES offers a significant level of power & performance. It is not intended for novice or inexperienced riders.
Choo choo mf'r.

User avatar
PhilJet09
Contributor
Veteran
Posts: 413
Joined: Mon Mar 24, 2014 8:49 pm
FJRModel: 2009 FJR1300A
Location: NW Ohio
x 1090
x 503

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by PhilJet09 » Sat Jul 14, 2018 10:17 pm

bigjohnsd wrote:
Tue Jul 10, 2018 4:51 pm

My Harbor Freight Changer is bolted to the floor when in use, stored by winching it up to the ceiling over my Harbor Freight Lift when not in use.
That’s what I do. Drilled holes in the concrete, dropped in some anchors, bolt it to the floor when needed, stored in the attic above the garage otherwise.
I’m a Christian and I love my country and will not apologize for either.
Petey is my hero.

User avatar
wheatonFJR
Contributor
I post more than I ride
Posts: 12846
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013
Location: Travelers Rest
x 20198
x 8819

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by wheatonFJR » Sat Jul 14, 2018 10:18 pm

Wow. I'd get my money back from that changer.
“There’s no better therapy than a ride.” -petey

User avatar
extrememarine
HMFIC
Veteran
Posts: 4275
Joined: Sun Jan 13, 2013 12:17 pm
FJRModel: 2009 FJR
Location: SE Michigan
x 416
x 4113

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by extrememarine » Mon Jul 16, 2018 9:44 pm

I have a Cycle Hill changer - low end model from No-Mar. Same mount / dismount bar, 2 of their spoons, 3 of their tire rim clamps and one of the "hand thingys", and the No-Mar tire lube.

I have concrete anchors in the garage floor - I have some threaded rod that is used to fill the holes when the changer is stored.

It takes a little longer to clamp the wheel on the changer (vs the No-Mar cam style clamp) and the bead breaker is down on the floor vs at the wheel clamp position.

The key(s) are a warm tire and lube.

Picked it up used, works great.
wheatonFJR and John d loved this
Ride There!
-Wayne aka asphalt surfer...

IBA#60836

#Peteyismyhero

User avatar
silverback
Veteran
Posts: 1912
Joined: Wed Feb 06, 2013 5:36 pm
FJRModel: 2005
Location: Wichita, KS
x 1
x 1085

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by silverback » Tue Jul 17, 2018 9:04 am

FWIW, to everyone changing tires, Murphy's tire soap is the same slick, gooey, smelly stuff as the No-Mar and is considerably less expensive per unit volume.

Usually the local auto parts store has it.

When you buy a huge-ish (20lb?) Bucket, you can slather it on around the bead to rim and it will usually seal well enough to make bead seating easy peasy. Then just scoop the excess that gets pushed out and put it back in the bucket. That 1/4lb jar they sent with the Cycle Hill isn't nearly enough.
Auburn loved this
There's just too much what the fuck in this thread to know where to begin...
--BikerGeek

Auburn
Contributor
Member
Posts: 320
Joined: Mon Mar 31, 2014 1:11 pm
FJRModel: 2006
x 662
x 343

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by Auburn » Tue Jul 17, 2018 9:49 am

silverback wrote:
Tue Jul 17, 2018 9:04 am
FWIW, to everyone changing tires, Murphy's tire soap is the same slick, gooey, smelly stuff as the No-Mar and is considerably less expensive per unit volume.

Usually the local auto parts store has it.

When you buy a huge-ish (20lb?) Bucket, you can slather it on around the bead to rim and it will usually seal well enough to make bead seating easy peasy. Then just scoop the excess that gets pushed out and put it back in the bucket. That 1/4lb jar they sent with the Cycle Hill isn't nearly enough.
about $26 bucks on amazon for a and 8 lb pail which looks like about 2 gallons Very cheap. works great
get out and ride! IBA #54706

User avatar
silverback
Veteran
Posts: 1912
Joined: Wed Feb 06, 2013 5:36 pm
FJRModel: 2005
Location: Wichita, KS
x 1
x 1085

Re: RE: Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by silverback » Tue Jul 17, 2018 9:59 am

AuburnFJR wrote:
silverback wrote:
Tue Jul 17, 2018 9:04 am
FWIW, to everyone changing tires, Murphy's tire soap is the same slick, gooey, smelly stuff as the No-Mar and is considerably less expensive per unit volume.

Usually the local auto parts store has it.

When you buy a huge-ish (20lb?) Bucket, you can slather it on around the bead to rim and it will usually seal well enough to make bead seating easy peasy. Then just scoop the excess that gets pushed out and put it back in the bucket. That 1/4lb jar they sent with the Cycle Hill isn't nearly enough.
about $26 bucks on amazon for a and 8 lb pail which looks like about 2 gallons Very cheap. works great
That sounds like a reasonable size. I have only seen it in 5 gallon bucket size when I worked in shops. Before the last divorce, I just fanagled about 10lbs from the local tire shop for $5 or so with a tire change on the truck.

Amazon. They have everything!
There's just too much what the fuck in this thread to know where to begin...
--BikerGeek

User avatar
raYzerman
Contributor
I post more than I ride
Posts: 5574
Joined: Mon Mar 18, 2013 10:49 am
FJRModel: 2009 CBF1000A Raspberry, 1999 VFR 800 Bumble Bee
Location: Millgrove, Ontario, CA
x 1411
x 4821

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by raYzerman » Tue Jul 17, 2018 12:32 pm

a half gallon-ish sie of RuGlyde rubber lubricant works awesome too, dilute it 50-50 with water and put it in a spray bottle. Last you for years.
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.

User avatar
bungie4
Veteran
Posts: 4844
Joined: Sat Jan 19, 2013 7:43 pm
FJRModel: 2013 FJR 1300
x 1951
x 3024

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by bungie4 » Tue Jul 17, 2018 12:39 pm

raYzerman wrote:
Tue Jul 17, 2018 12:32 pm
a half gallon-ish sie of RuGlyde rubber lubricant works awesome too, dilute it 50-50 with water and put it in a spray bottle. Last you for years.
You're still talking about mounting tires right?
WWPD.
#SnowMexican
Note: The FJR1300ES offers a significant level of power & performance. It is not intended for novice or inexperienced riders.
Choo choo mf'r.

User avatar
raYzerman
Contributor
I post more than I ride
Posts: 5574
Joined: Mon Mar 18, 2013 10:49 am
FJRModel: 2009 CBF1000A Raspberry, 1999 VFR 800 Bumble Bee
Location: Millgrove, Ontario, CA
x 1411
x 4821

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by raYzerman » Tue Jul 17, 2018 12:49 pm

Multi-purpose Dude! And water soluable, does it get any better?
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.

User avatar
Harald
Member
Posts: 240
Joined: Tue Jan 22, 2013 12:12 pm
FJRModel: 2007 FJR1300A
Location: Bonney Lake, WA
x 265
x 131

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by Harald » Tue Jul 17, 2018 2:15 pm

raYzerman wrote:
Tue Jul 17, 2018 12:32 pm
a half gallon-ish sie of RuGlyde rubber lubricant works awesome too, dilute it 50-50 with water and put it in a spray bottle. Last you for years.
Available at NAPA stores! This is what I use.

User avatar
tominca
Veteran
Posts: 463
Joined: Tue Mar 12, 2013 9:17 pm
FJRModel: 2005 ABS
Location: Pittsburgh
x 38
x 235

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by tominca » Tue Jul 17, 2018 3:46 pm

I have done a lot of tire changes on a modified Harbor Freight stand. I have the Mojo Blocks and use a NoMar bar. I also installed a Cycle Hill bead breaker since it is so much better and won't scratch. Like BigJohnSD I use the big yellow thing. An essential accessory is a strap to keep the wheel from turning. I have the FJReady balancer, weights, valve tools, and no-mar lube.

The HF tire changer bolts to the concrete floor with 8-threaded anchors that are flush to the floor when not in use. The system has worked very well for me but the T30 GT tires in 190/55-17 are a special challenge. I get them done, but they like me to talk dirty to them. What I'd like to add is the XtraHand Clamp (or two) to keep the tire in the center of the wheel.
It's a good day to ride

HaulinAshe
Squid
Posts: 16
Joined: Thu Mar 28, 2013 8:17 pm
FJRModel: 2007
Location: Dallas, NC
x 17

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by HaulinAshe » Sat Sep 29, 2018 5:10 pm

Weather will be turning cooler soon, so I thought I'd throw in a frugal purchase suggestion for anyone changing tars in cold weather...
Buy a cheap electric blanket and wrap it around your new hoops then toss it into a cardboard box for about an hour prior to changing. Toasty warm tars are WAY easier to spoon.
bungie4, John d, and wheatonFJR loved this

Auburn
Contributor
Member
Posts: 320
Joined: Mon Mar 31, 2014 1:11 pm
FJRModel: 2006
x 662
x 343

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by Auburn » Tue Oct 02, 2018 5:58 pm

HaulinAshe wrote:
Sat Sep 29, 2018 5:10 pm
Weather will be turning cooler soon, so I thought I'd throw in a frugal purchase suggestion for anyone changing tars in cold weather...
Buy a cheap electric blanket and wrap it around your new hoops then toss it into a cardboard box for about an hour prior to changing. Toasty warm tars are WAY easier to spoon.
Holy cow...Ashe is still around...good to see you commenting! :) :) :)
get out and ride! IBA #54706

User avatar
wheatonFJR
Contributor
I post more than I ride
Posts: 12846
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013
Location: Travelers Rest
x 20198
x 8819

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by wheatonFJR » Tue Oct 02, 2018 6:17 pm

I saw him just the other day at EOM.

He was riding someone else's bike around the parking lot.
“There’s no better therapy than a ride.” -petey

User avatar
bill lumberg
Contributor
Veteran
Posts: 1618
Joined: Tue Jun 30, 2015 1:03 pm
FJRModel: 2018ES
x 2231
x 2023

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by bill lumberg » Wed Oct 03, 2018 3:31 am

Never changed my own tires. I pay a minimum of $80 a set a change. Makes you gravitate toward longer lasting tires for sure.
Active listening is the new handshake.

IBA# 69560

User avatar
bill lumberg
Contributor
Veteran
Posts: 1618
Joined: Tue Jun 30, 2015 1:03 pm
FJRModel: 2018ES
x 2231
x 2023

Re: Tire Changing: DIY tire machines, gadgets, and apparatus

Post by bill lumberg » Sat Nov 24, 2018 9:10 am

If only we had someone to make a video of themself talking for 45 minutes then showing us how to perform this task at home
wheatonFJR loved this
Active listening is the new handshake.

IBA# 69560

Post Reply